中国塑料

中国塑料 ›› 2012, Vol. 26 ›› Issue (03): 23-27 .DOI: 10.19491/j.issn.1001-9278.2012.03.004

• 材料与性能 • 上一篇    下一篇

聚乳酸/聚丁二酸丁二醇酯共混物的研究

叶丹丹 陆佳琦 钱天悦 戚嵘嵘 曹祝生   

  1. 上海交通大学 上海交通大学附属中学 上海交通大学 安庆和兴化工有限责任公司
  • 收稿日期:2011-10-20 修回日期:1900-01-01 出版日期:2012-03-26 发布日期:2012-03-26

Research on Poly(lactic acid)/Poly(butylenes succinate) Blends

  

  • Received:2011-10-20 Revised:1900-01-01 Online:2012-03-26 Published:2012-03-26

摘要： 通过熔融共混制备了聚乳酸(PLA)/聚丁二酸丁二醇酯(PBS)共混物，采用扫描电子显微镜、差示扫描量热仪、旋转流变仪对其相容性、热性能和黏度等进行了研究，并研究了PBS的加入对PLA力学性能的影响。结果表明，PLA和PBS之间是部分相容的，PBS的少量添加并不影响PLA的拉伸强度，且其冲击强度随着PBS含量的增加呈先上升后下降的趋势，当PBS含量为10份时，共混物的冲击强度最好；与纯PLA相比，共混物的黏度有所增加，且随着PBS含量的增加，共混物的黏度逐渐增大；PBS的添加起到异相成核作用，促进了PLA的结晶。

关键词: 共混物, 力学性能, 相容性, 聚乳酸, 聚丁二酸丁二醇酯

Abstract: In this study, poly (lactic acid) (PLA )/poly(butylenes succinate) (PBS) blends were obtained via melt blending and their compatibility, thermal property, viscosity, and mechanical property were investigated using scanning electron microscope, differential scanning calorimetry, and rotational rheometer. It showed that there was some compatibility between PLA and PBS, and the tensile strength was almost unchanged at low PBS loadings. The impact strength of the blend increased first and then decreased with increasing PBS content, providing a maximum at a PBS content of 10 phr. The viscosity of the blends increased with increasing PBS content. PBS also functioned as a heterogeneous nucleation agent, which promoted the crystallinity of PLA.

Key words: blend, mechanic property, compatibility, poly(lactic acid), poly(butylenes succinate)

京公网安备11010802034965号　 京ICP备13020181号-2
《中国塑料》编辑部 ©2008-2023 版权所有
地址:北京市海淀区阜成路11号　邮编：100048
编辑部：010-68985541　联系信箱：cp@plaschina.com.cn
广告部/发行部：010-68985253　本系统由北京玛格泰克科技发展有限公司设计开发