双螺杆挤出过程数值模拟研究进展

doi:10.19491/j.issn.1001-9278.2020.09.017

中国塑料 ›› 2020, Vol. 34 ›› Issue (9): 96-102.DOI: 10.19491/j.issn.1001-9278.2020.09.017

双螺杆挤出过程数值模拟研究进展

王贺祥¹, 彭炯¹(), 葛震², 张永涛³, 郭炳毅³, 李忠山³

^1.北京理工大学化学与化工学院，北京 102488
^2.北京理工大学材料学院，北京 100081
^3.西安北方惠安化学有限公司，西安 710302

收稿日期:2020-04-08 出版日期:2020-09-26 发布日期:2020-09-25

Research Progress in Numerical Simulation of Twin-screw Extrusion Process

WANG Hexiang¹, PENG Jiong¹(), GE Zhen², ZHANG Yongtao³, GUO Bingyi³, LI Zhongshan³

^1.School of Chemistry and Chemical Engineering, Beijing Institute of Technology，Beijing 102488，China
^2.School of Materials Science&Engineering, Beijing Institute of Technology，Beijing 100081，China
^3.Xi’an North Huian Chemical Co，Ltd，Xi’an 710302，China

Received:2020-04-08 Online:2020-09-26 Published:2020-09-25
Contact: PENG Jiong E-mail:jiongpeng@163.com

摘要/Abstract

摘要：

在聚合物的双螺杆挤出过程的研究中，采用数值模拟的方法可以克服传统实验方法的局限，可为挤出机的设计加工提供参考。回顾了近年来国内外对双螺杆挤出过程数值模拟的研究成果，介绍了一维数学模型和三维数学模型对挤出过程进行数学描述的优缺点，从双螺杆挤出机内部的流场特性、瞬态混合性能、停留时间分布以及反应挤出等方面综述了相关研究进展，并对双螺杆挤出过程数值模拟的今后发展方向进行了展望。

关键词: 聚合物, 加工, 双螺杆挤出, 数值模拟

Abstract:

In the study on twin-screw extrusion process of polymers, the numerical simulation method can overcome the limitations of traditional experimental methods and provide important guidance for design and processing of twin-screw extruder. This paper reviewed the research progress in the numerical simulation of twin-screw extrusion process at home and abroad in recent years, and also introduced the advantages and disadvantages of mathematical description of the extrusion process by the one?dimensional mathematical model and three?dimensional mathematical model. The relevant research progress was summarized in the aspects of flow field characteristics, transient mixing performance, residence time distribution and reactive extrusion in the twin-screw extruder. Moreover, the future development direction of the numerical simulation of twin-screw extrusion process was prospected.

Key words: polymer, processing, twin-screw extrusion, numerical simulation

中图分类号:

TQ320.66⁺3

王贺祥, 彭炯, 葛震, 张永涛, 郭炳毅, 李忠山. 双螺杆挤出过程数值模拟研究进展[J]. 中国塑料, 2020, 34(9): 96-102.

WANG Hexiang, PENG Jiong, GE Zhen, ZHANG Yongtao, GUO Bingyi, LI Zhongshan. Research Progress in Numerical Simulation of Twin-screw Extrusion Process[J]. China Plastics, 2020, 34(9): 96-102.

图/表 2

参考文献 54

1	耿孝正. 双螺杆挤出机及其应用[M]. 北京：中国轻工业出版社, 2003:30⁃35.
2	ZHU W, JALURIA Y. Residence Time and Conversion in the Extrusion of Chemically Reactive Materials[J]. Polymer Engineering & Science, 2001, 41(7):1 280⁃1 291.
3	RAMKRISHNA D, AMUNDSON N R. Mathematics in Chemical Engineering: A 50 Year Introspection[J]. Aiche Journal, 2004, 50(1):7⁃23.
4	陈晋南, 胡冬冬, 彭炯. 计算流体动力学(CFD)及其软件包在双螺杆挤出中的应用[J]. 中国塑料, 2001, 15(12):12⁃16.
	CHEN J N, HU D D, PENG J. Application of Computational Fluid Dynamics (CFD) and Its Software Packages in Twin⁃Screw Extrusion[J]. China Plastics, 2001, 15(12):12⁃16.
5	DENSON C D, HWANG B K. The Influence of the Axial Pressure Gradient on Flow Rate for Newtonian Liquids in a Self Wiping, Co⁃Rotating Twin Screw Extruder[J]. Polymer Engineering & Science, 1980, 20(14):965⁃971.
6	SZYDLOWSKI W, WHITE J L. An Improved Theory of Metering in an Intermeshing Corotating Twin: Crew Extruder[J]. Advances in Polymer Technology, 1987, 7(2):177⁃183.
7	MEIJER H E H, ELEMANS P H M. The Modeling of Continuous Mixers. Part I: the Corotating Twin⁃Screw Extruder[J]. Polymer Engineering and Science, 1988, 28(5):275⁃290.
8	POTENTE H, BASTIAN M, FLECKE J. Design of a Compounding Extruder by Means of The SIGMA Simulation Software[J]. Advances in Polymer Technology, 1999, 18(2):147⁃170.
9	POULESQUEN A, VERGNES B. A Study of Residence Time Distribution in Co⁃Rotating Twin⁃Screw Extruders. Part I: Theoretical Modeling[J]. Polymer Engineering & Science, 2003, 43(12): 1 841⁃1 848.
10	RAUWENDAAL C J. Analysis and Experimental Evaluation of Twin Screw Extruders[J]. Polymer Engineering & Science, 1981, 21(16):1 092⁃1 100.
11	叶阳, 成文凯, 王嘉骏,等. 聚合物反应挤出过程数值模拟进展[J]. 高分子通报，2018, 233(9):4⁃10.
	YE Y, CHENG W K, WANG J J, et al. Progress in Numerical Simulation of Polymer Reactive Extrusion Process[J]. Polymer Bulletin. 2018, 233(9):4⁃10.
12	王福军. 计算流体动力学分析—CFD软件原理与应用[M]. 北京：清华大学出版社，2004：7⁃9.
13	YANG H H, MANAS⁃ZLOCZOWER I. 3D Flow Field Analysis of a Banbury Mixer[J]. International Polymer Processing Journal of the Polymer Processing Society, 1992, 7(3):195⁃203.
14	ISHIKAWA T, SHIN I K, FUNATSU K. 3⁃D Numerical Simulations of Nonisothermal Flow in Co⁃Rotating Twin Screw Extruders[J]. Polymer Engineering & Science, 2000,40(2):357⁃364.
15	彭炯, 陈晋南. 同向旋转双螺杆挤出机计量段中聚合物挤出的模拟[J]. 中国塑料, 2001,15(7):39⁃42.
	PENG J, CHEN J N. Simulation Of Polymer Extrusion in the Metering Section of a Co⁃Rotating Twin Screw Extruder[J]. China Plastics, 2001,15(7):39⁃42.
16	BARRERA M A, VEGA J F. MARTÍNEZ S. Three⁃Dimensional Modelling of Flow Curves in Co⁃Rotating Twin⁃Screw Extruder Elements[J]. Journal of Materials Processing Technology, 2008, 197(1/3):221⁃224.
17	Zhu L, Narh K A, Hyun K S. Evaluation of Numerical Simulation Methods in Reactive Extrusion[J]. Advances in Polymer Technology, 2005, 24(3):183⁃193.
18	MCGUIRE A D, MOSBACH S, LEE K F, et al. A High⁃Dimensional, Stochastic Model for Twin⁃Screw Granulation Part 2: Numerical Methodology[J]. Chemical Engineering Science, 2018(188):18⁃33.
19	GRIMARD J, DEWASME L, WOUWER A V. Dynamic Modeling and Model⁃Based Control of a Twin Screw Extruder[C]// Mediterranean Conference on Control & Automation. IEEE, 2017:316⁃321.
20	SHIRAZIAN S, KUHS M, DARWISH S, et al. Artificial Neural Network Modelling of Continuous Wet Granulation Using a Twin⁃Screw Extruder[J]. International Journal of Pharmaceutics, 2017, 521(1/2):102⁃109.
21	李鹏, 耿孝正, 马秀清. 啮合同向双螺杆挤出机螺纹元件三维流场分析[J]. 中国塑料, 2001,15(6):79⁃83.
	LI P, GENG X Z, MA X Q. Three⁃Dimensional Flow Field Analysis of Screw Elements of Co⁃Rotating Twin Screw Extruder[J]. China Plastics, 2001,15(6):79⁃83.
22	胡冬冬, 陈晋南. 啮合同向双螺杆挤出机中组合螺杆性能的数值研究(Ⅰ)瞬态流场分析[J]. 中国塑料, 2005,19(3):90⁃100.
	HU D D, CHEN J N. Numerical Study on the Performance of Combined Screw in Intermeshing Co⁃Rotating Twin⁃Screw Extruder (Ⅰ) Transient Flow Field Analysis[J]. China Plastics, 2005,19(3):90⁃100.
23	CONZEN C, OLAF W. Simulation of the Non⁃Isothermal Flow in a Twin⁃Screw Extruder[J]. Pamm, 2007, 7(1):4 100 013⁃4 100 014.
24	SALAHUDEEN S A, RAHMAT A R. Design Parameter to Develop Secondary Flow in Twin Screw Extruder[J]. Applied Mechanics and Materials, 2015, 695:659⁃662.
25	ZHU L X, WEI H Y, LUO S M, et al. Simulation and Experiment of the Motion Characters in Twin⁃Screw Extruder[J]. Applied Mechanics & Materials, 2015, (799/800):528⁃532.
26	TOSHIHISA K, YUKI N, YOSHIO N, et al. Numerical Study of Twin⁃Screw Extruders by Three⁃Dimensional Flow Analysis⁃Development of Analysis Technique and Evaluation of Mixing Performance for Full Flight Screws[J]. Polymer Engineering & Science, 1996, 36(16): 2 142⁃2 152.
27	CHIH⁃HSIANG Y, MANAS⁃ZLOCZOWER I. Influence of Design on Dispersive Mixing Performance in an Axial Discharge Continuous Mixer—LCMAX 40[J]. Polymer Engineering and Science, 1998, 38(6):936⁃946.
28	YOSHINAGA M, KATSUKI S, MIYAZAKI M, et al. Mixing Mechanism of Three⁃Tip Kneading Block in Twin Screw Extruders[J]. Polymer Engineering and Science, 2000, 40(1):168⁃178.
29	HONGFEI C, MANAS⁃ZLOCZOWER I. Study of Mi⁃xing Efficiency in Kneading Discs of Co⁃Rotating Twin⁃Screw Extruders[J]. Polymer Engineering & Science, 1997, 37(6):1 082⁃1 090.
30	HONGFEI, CHENG, ICA, et al. Distributive Mixing in Conveying Elements of a ZSK⁃53 Co⁃Rotating Twin Screw Extruder[J]. Polymer Engineering & Science, 1998,38(6): 926⁃935.
31	VILLÉON D L, BERTRAND F, TANGUY P A, et al. Numerical Investigation of Mixing Efficiency of Helical Ribbons[J]. AIChE Journal, 1998, 44(4):972⁃977.
32	LEE T H, KWON T H. A New Representative Measure of Chaotic Mixing in a Chaos Single⁃Screw Extruder[J]. Advances in Polymer Technology, 1999, 18(1):53⁃68.
33	张澎湃. 啮合同向双螺杆挤出机螺纹元件流场分析[D]. 秦皇岛: 燕山大学, 2004.
34	CONNELLY R K, KOKINI J L. Examination of the Mi⁃xing Ability of Single and Twin Screw Mixers Using 2D Finite Element Method Simulation with Particle Tracking[J]. Journal of Food Engineering, 2007, 79(3):956⁃969.
35	XIAN M Z, LIAN F F, WEN X C, et al. Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in a Twin Screw Extruder[J]. Polymer Engineering & Science, 2009, 49(9): 1 772⁃1 783.
36	林桦, 吴桐, 夏平, 等. 双螺杆挤出机螺纹元件组解聚混合性能的建模及实验表征[J]. 高分子材料科学与工程, 2015, 31(5):87⁃92.
	LIN H, WU T, XIA P, et al. Modeling and Experimental Validation of Deagglomerating Capacity of Screw Elements Configuration in Twin Screw Extruder[J]. Polymer Materials Science & Engineering, 2015, 31(5):87⁃92.
37	SHEA J J. Plastic Compounding Equipment and Proces⁃sing[J]. IEEE Electrical Insulation Magazine, 1998, 14(5):40⁃40.
38	AVALOSSE T, RUBIN Y, FONDIN L. Non⁃Isothermal Modeling of Co⁃Rotating and Contra⁃Rotating Twin Screw Extruders[J]. Journal of Reinforced Plastics and Composites, 2002, 21(5):419⁃429.
39	CHEN L, HU G H. Applications of a Statistical Theory in Residence Time Distributions[J]. Aiche Journal, 1993, 39(9):1 558⁃1 562.
40	CHEN L G, HU G H, LINDT J T. Residence Time Distribution in Non⁃Intermeshing Counter⁃Rotating Twin⁃Screw Extruders[J]. Polymer Engineering & Science, 1995, 35(7):598⁃603.
41	POULESQUEN A, VERGNES B, CASSAGNAU P, et al. A New Approach for Modelling Residence Time Distribution in a Co⁃Rotating Twin Screw Extruder[J]. CHIMIA International Journal for Chemistry, 2001, 55(3): 247⁃248.
42	POULESQUEN A, VERGNES B. A Study of Residence Time Distribution in Co⁃Rotating Twin⁃Screw Extruders. Part I: Theoretical Modeling[J]. Polymer Engineering & Science, 2003, 43(12): 1 841⁃1 848.
43	胡冬冬, 陈晋南. 啮合同向双螺杆挤出机中组合螺杆性能的数值研究(Ⅱ)混合特性分析[J]. 中国塑料, 2005, 19(6):103⁃109.
	HU D D, CHEN J N. Numerical Study on the Performance of Combined Screw in Intermeshing Co⁃Rotating Twin Screw Extruder (Ⅱ) Analysis Of Mixing Characte⁃ristics[J]. China Plastics, 2005,19(6):103⁃109.
44	RÉGIS B, VAUCHEL P, KAAS R, et al. Dynamical Modelling of a Reactive Extrusion Process: Focus on Residence Time Distribution in a Fully Intermeshing Co⁃Rotating Twin⁃Screw Extruder and Application to An Alginate Extraction Process[J]. Chemical Engineering Science, 2010, 65(10):3 313⁃3 321.
45	马里诺, 赞索斯. 反应挤出⁃原理与实践[M]. 翟金平, 李光吉, 周南桥，译. 北京: 化学工业出版社, 1999:71.
46	MICHAELI W, GREFENSTEIN A. Engineering Analysis and Design of Twin⁃Screw Extruders for Reactive Extrusion[J]. Advances in Polymer Technology, 1995, 14(4):263⁃276.
47	MICHAELI W, GREEFENSTEIN A, BERGHAUS U. Twin⁃Screw Extruders for Reactive Extrusion[J]. Polymer Engineering & Science, 1995, 35: 1 485⁃1 504.
48	STRUTT D, TZOGANAKIS C, DUEVER T A. Mi⁃xing Analysis of Reactive Polymer Flow in Conveying Elements of a Co⁃Rotating Twin Screw Extruder[J]. Advances in Polymer Technology, 2000, 19(1):22⁃33.
49	CHOULAK S, COUENNE F, LE GORREC Y, et al. Generic Dynamic Model for Simulation and Control of Reactive Extrusion[J]. Industrial & Engineering Chemistry Research, 2004, 43(23):7 373⁃7 382.
50	RENÉ O V, VIVALDO⁃LIMA E, MANERO O. Simulation of Nonlinear Polyurethane Production in a Twin⁃Screw Extruder[J]. Polymer⁃Plastics Technology and Engineering, 2006, 45(1):9⁃21.
51	ZHU L, NARH K A, HYUN K S. Investigation of Mi⁃xing Mechanisms and Energy Balance in Reactive Extrusion Using Three⁃Dimensional Numerical Simulation Method[J]. International Journal of Heat & Mass Transfer, 2005, 48(16):3 411⁃3 422.
52	TANG H, ZONG Y, ZHAO L. Numerical Simulation of Micromixing Effect on the Reactive Flow in a Co⁃Rotating Twin Screw Extruder[J]. Chinese Journal of Chemical Engineering, 2016, 24(9): 1 135⁃1 146.
53	ZONG Y, TANG H, ZHAO L. 3⁃D Numerical Simulations for Polycondensation of Poly(P⁃Phenylene Terephthalamide) in Twin Screw Extruder[J]. Polymer Engineering & Science, 2017, 57(11): 1 252⁃1 261.
54	SUN D P ZHU X Z, GAO M G. 3D Numerical Simulation of Reactive Extrusion Processes for Preparing PP/Tio₂ Nanocomposites in a Corotating Twin Screw Extruder[J]. Materials, 2019, 12(4): 671⁃687.

[1]	黄雪梅, 柳和生, 黄兴元, 余忠, 江诗雨. U型件的气体辅助挤出成型工艺的数值模拟与实验研究[J]. 中国塑料, 2022, 36(7): 93-103.
[2]	邓世欣, 王建, 杨卫民. 增强反应注射成型机混合头内流体高压高速对撞过程模拟与分析[J]. 中国塑料, 2022, 36(6): 130-136.
[3]	马占峰, 牛国强, 芦珊. 中国塑料加工业（2021）[J]. 中国塑料, 2022, 36(6): 142-148.
[4]	杨小龙, 陈文静, 李永青, 闫晓堃, 王修磊, 谢鹏程, 马秀清. 导电型聚合物/石墨烯复合材料的研究进展[J]. 中国塑料, 2022, 36(6): 165-173.
[5]	张庆弢, 毕超. 基于CFD⁃DEM的水下切粒装置水室内颗粒流动过程数值模拟[J]. 中国塑料, 2022, 36(6): 87-91.
[6]	孙旗, 高兴, 崔雪梅, 连慧琴, 崔秀国, 汪晓东. 黑磷烯纳米阻燃剂研究进展[J]. 中国塑料, 2022, 36(5): 133-139.
[7]	田驰锋, 张洪申. 基于翅片式摩擦桶的车用聚合物粒子荷电及静电分离探索[J]. 中国塑料, 2022, 36(5): 75-80.
[8]	宋立健, 张有忱, 左夏华, 张政和, 安瑛, 杨卫民, 谭晶, 程礼盛. 自组装单分子层调控界面热输运的研究进展[J]. 中国塑料, 2022, 36(4): 60-69.
[9]	班董董, 王丹华, 刘奎, 李亚楠, 李涵, 戴亚辉. 波状双螺杆元件混炼性能的数值模拟[J]. 中国塑料, 2022, 36(4): 95-101.
[10]	程曼芳, 白继峰, 王文清, 雷良才, 李海英, 韩向艳, 胡跃鑫. 基于超支化聚对氯甲基苯乙烯聚合离子液体共混体系的制备与表征[J]. 中国塑料, 2022, 36(3): 40-47.
[11]	张庭, 金清平, 宋仕娥, 曹南南, 邓思远. 不同腐蚀环境下FRP筋耐久性与寿命预测研究进展[J]. 中国塑料, 2022, 36(3): 75-81.
[12]	贾垚, 张泽, 余正发, 崔永岩. 动态可逆交联聚氯乙烯的制备与二次加工测试[J]. 中国塑料, 2022, 36(3): 82-88.
[13]	郝春波, 刘万胜, 赵欣麟, 王岩, 王月. 本体ABS用橡胶国产化替代分析及评价[J]. 中国塑料, 2022, 36(3): 89-95.
[14]	安瑛, 刘宇亮, 谭晶, 杨卫民, 阎华, 李好义. 聚合物离心静电纺丝技术研究进展[J]. 中国塑料, 2022, 36(1): 172-177.
[15]	李明丰, 蔡志强, 邹亮, 魏晓丽, 习远兵, 王国清, 蔡立乐, 张哲民, 夏国富, 蒋海滨. 中国石化废旧塑料化学回收与化学循环技术探索[J]. 中国塑料, 2021, 35(8): 64-76.

双螺杆挤出过程数值模拟研究进展

Research Progress in Numerical Simulation of Twin-screw Extrusion Process

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 2

参考文献 54

相关文章 15

编辑推荐

Metrics

本文评价