1 |
KUO C F J, DEWANTORO G,HUANG C C. Optimization of injection⁃molded light guide plate with microstructures by using reciprocal comparisons[J]. Journal of Intelligent Manufacturing, 2013, 26(4): 677⁃690.
|
2 |
KASHYAP S,DATTA D. Process parameter optimization of plastic injection molding: a Review[J]. International Journal of Plastics Technology, 2015, 19(1): 1⁃18.
|
3 |
CHEN Z,TURNG L S. A review of current developments in process and quality control for injection molding[J]. Advances in Polymer Technology, 2005, 24(3): 165⁃182.
|
4 |
LI D, ZHOU H, ZHAO P, et al. A real⁃time process optimization system for injection molding[J]. Polymer Engineering & Science, 2009, 49(10): 2 031⁃2 040.
|
5 |
GAO Y,WANG X. Surrogate⁃based process optimization for reducing warpage in injection molding[J]. Journal of Materials Processing Technology, 2009, 209(3): 1 302⁃1 309.
|
6 |
TIAN M, GONG X, YIN L, et al. Multi⁃objective optimization of injection molding process parameters in two stages for multiple quality characteristics and energy efficiency using taguchi method and nsga⁃ii[J]. The International Journal of Advanced Manufacturing Technology, 2016, 89(1⁃4): 241⁃254.
|
7 |
郭 进.全球智能制造业发展现状、趋势与启示[J].经济研究参考,2020(5):31⁃42.
|
|
GUO J. Intelligent manufacturing industry:global status,development trend and its inspiration to China. [J]. Review of Economic Research,2020(5):31⁃42.
|
8 |
李德群,周华民,赵 朋,等.智能型塑料注射机的研究与开发[J].电加工与模具,2014(S1):54⁃55,63.
|
|
LI D Q , ZHOU H M , ZHAO P , et al. Research and development of intelligent plastic injection machines[J]. Electromachining & Mould,2014(S1):54⁃55,63.
|
9 |
MOK S L ,KWONG C K , LAW W S. Review of research in the determination of process parameters for plastic injection molding[J]. Advances in Polymer Technology, 1999, 18(3):225⁃236.
|
10 |
BERMAN A F, MALTUGUEVA G S,YURIN A Y. Application of case⁃based reasoning and multi⁃criteria decision⁃making methods for material selection in petrochemistry[J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2015, 232(3): 204⁃212.
|
11 |
DENG Z, ZHANG H, FU Y, et al. Research on intelligent expert system of green cutting process and its application[J]. Journal of Cleaner Production, 2018, 185:904⁃911.
|
12 |
CHAVES M L, MÁRQUEZ J J, PÉREZ H, et al. Intelligent decision system based on fuzzy logic expert system to improve plastic injection molding process[C]// International Workshop on Soft Computing Models in Industrial and Environmental Applications Computational Intelligence in Security for Information Systems Conference International Conference on EUropean Transnational Education. Leon, Spain:Speinger ,2018:57⁃67.
|
13 |
SHELESH⁃NEZHAD K , SIORES P E. An intelligent system for plastic injection molding process design[J]. Journal of Materials Processing Technology, 1997, 63( 1⁃3):458⁃462.
|
14 |
TAY⁃CHERNG J, O'b KEITH T. A user⁃friendly, interactive expert system for the injection moulding of engineering thermoplastics[J]. The International Journal of Advanced Manufacturing Technology,1993,8(1):42⁃51.
|
15 |
辛 勇,赵 果.薄壳注塑制品多指标工艺参数优化[J].中国塑料,2009,23(1):59⁃63.
|
|
XIN Y , ZHAO G. Optimization of multi⁃target parameters on injection molded thin⁃wall products[J]. China Plastics,2009,23(1):59⁃63.
|
16 |
DUVERLIE P,CASTELAIN J M. Cost estimation during design step: parametric method versus case based reasoning method[J]. International Journal of Advanced Manufacturing Technology,1999,15(12):895⁃906.
|
17 |
ZHOU H, ZHAO P,FENG W. An integrated intelligent system for injection molding process determination[J]. Advances in Polymer Technology, 2007, 26(3): 191⁃205.
|
18 |
YU S , ZHANG T , ZHANG Y , et al. Intelligent setting of process parameters for injection molding based on case⁃based reasoning of molding features[J]. Journal of Intelligent Manufacturing, 2020(13), DOI: 10.1007/s10845-020-01658-y.
|
19 |
NASIRI S,KHOSRAVANI M R. Faults and failures prediction in injection molding process[J]. The International Journal of Advanced Manufacturing Technology, 2019, 103(5⁃8): 2 469⁃2 484.
|
20 |
LU N Y, GONG G X, LU J H. Multi⁃objective process parameter optimization for energy saving in injection molding process[J]. Journal of Zhejiang University Science A, 2012, 13(5):382⁃394.
|
21 |
DENG Y M, LAM Y C,BRITTON G A. Optimization of injection moulding conditions with user⁃definable objective functions based on a genetic algorithm[J]. International Journal of Production Research, 2007, 42(7): 1 365⁃1 390.
|
22 |
WU C Y, KU C C, PAI H Y. Injection molding optimization with weld line design constraint using distributed multi⁃population genetic algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2010, 52(1⁃4): 131⁃141.
|
23 |
ZHAO J, CHENG G, RUAN S, et al. Multi⁃objective optimization design of injection molding process parameters based on the improved efficient global optimization algorithm and non⁃dominated sorting⁃based genetic algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78(9⁃12): 1 813⁃1 826.
|
24 |
DENG Y M, ZHANG Y,LAM Y C. A Hybrid of mode⁃pursuing sampling method and genetic algorithm for minimization of injection molding warpage[J]. Materials & Design, 2010, 31(4): 2 118⁃2 123.
|
25 |
MEIABADI M S , VAFAEESEFAT A , SHARIFI F. Optimization of plastic injection molding process by combination of artificial neural network and genetic algorithm[J]. Journal of Optimization in Industrial Enginee⁃ring, 2013,13:49⁃54.
|
26 |
ZOU T, WU S,ZHANG R. Improved State Space Mo⁃del Predictive Fault⁃Tolerant Control for Injection Mol⁃ding Batch Processes with Partial Actuator Faults Using Ga Optimization[J]. ISA Trans, 2018, 73:147⁃153.
|
27 |
OZCELIK B,ERZURUMLU T. Comparison of the warpage optimization in the plastic injection molding using anova, neural network model and genetic algorithm[J]. Journal of Materials Processing Technology, 2006, 171(3): 437⁃445.
|
28 |
XU G, YANG Z T,LONG G D. Multi⁃objective optimization of mimo plastic injection molding process conditions based on particle swarm optimization[J]. The International Journal of Advanced Manufacturing Technology, 2011, 58(5⁃8): 521⁃531.
|
29 |
KUMAR S,SINGH A K. Warpage and shrinkage analysis and optimization of rapid tooling molded thin wall component using modified particle swarm algorithm[J]. Journal of Advanced Manufacturing Systems, 2019, 18(1): 85⁃102.
|
30 |
CHEN W C , NGUYEN M H ,TAI P H. An intelligent manufacturing system for injection molding[J]. Procee⁃dings of Engineering and Technology Innovation,2018,8:09⁃14.
|
31 |
XU Y, ZHANG Q, ZHANG W, et al. Optimization of injection molding process parameters to improve the mechanical performance of polymer product against impact[J]. The International Journal of Advanced Manufactu⁃ring Technology, 2014, 76(9⁃12): 2 199⁃2 208.
|
32 |
MTSAI K,LUO H J. An inverse model for injection molding of optical lens using artificial neural network coupled with genetic algorithm[J]. Journal of Intelligent Manufacturing, 2014, 28(2): 473⁃487.
|
33 |
GUO F, ZHOU X, LIU J, et al. A Reinforcement Learning Decision Model for Online Process Parameters Optimization from Offline Data in Injection Molding[J]. Applied Soft Computing, 2019,85:105 828.
|
34 |
CHEN J C, GUO G,WANG W N. Artificial neural network⁃based online defect detection system with in⁃mold temperature and pressure sensors for high precision injection molding[J]. The International Journal of Advanced Manufacturing Technology, 2020, 110(7⁃8): 2 023⁃2 033.
|
35 |
DAI H C ,COLIN M. Effects of learning parameters on learning procedure and performance of a BPNN[J]. Neural Networks,1997,10(8):1 505⁃1 521.
|
36 |
CAI K, WANG Y,LU S. Research on optimization design of injection mold for automobile filter shell model based on bp neural network[J]. IOP Conference Series: Materials Science and Engineering, 2019, 612:032014.
|
37 |
CHEN W C, HLIOU P,CCHOU S. An integrated parameter optimization system for mimo plastic injection molding using soft computing[J]. The International Journal of Advanced Manufacturing Technology, 2014, 73(9⁃12): 1 465⁃1 474.
|
38 |
LEE H, LIAU Y,RYU K. Real⁃time parameter optimization based on neural network for smart injection molding[J]. IOP Conference Series: Materials Science and Engineering, 2018, 324:012076.
|
39 |
YAN T, MEI Y,WANG L, Optimization of Fhb5.10 electrical appliance shell injection molding process based on moldflow and bp neural network[C]// 2020 3rd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM). Shanghai, China: IEEE Computer Society. 2020:217⁃225.
|
40 |
SONG Z, LIU S, WANG X, et al. Optimization and prediction of volume shrinkage and warpage of injection⁃molded thin⁃walled parts based on neural network[J]. The International Journal of Advanced Manufacturing Technology, 2020, 109(3⁃4): 755⁃769.
|
41 |
LI K, YAN S, PAN W, et al. Warpage optimization of fiber⁃reinforced composite injection molding by combining back propagation neural network and genetic algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2016, 90(1⁃4): 963⁃970.
|
42 |
EKTA S M J,RAJESH K B. Simulation and optimization of warpage of fiber reinforced using human behavior based optimization[J].International Journal of Innovative Technology and Exploring Engineering (IJITEE),2019,8(10): 296⁃302.
|
43 |
CHEN W C, WANG M W, CHEN C T, et al. An integrated parameter optimization system for miso plastic injection molding[J]. The International Journal of Advanced Manufacturing Technology, 2008, 44(5/6): 501⁃511.
|
44 |
YIN F, MAO H,HUA L. A hybrid of back propagation neural network and genetic algorithm for optimization of injection molding process parameters[J]. Materials & Design, 2011, 32(6): 3 457⁃3 464.
|
45 |
KITAYAMA S, ARAKAWA M,YAMAZAKI K. Sequential approximate optimization using radial basis function network for engineering optimization[J]. Optimization and Engineering, 2010, 12(4): 535⁃557.
|
46 |
HASHIMOTO S, KITAYAMA S, TAKANO M, et al. Simultaneous optimization of variable injection velocity profile and process parameters in plastic injection molding for minimizing weldline and cycle time[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2020, 14(3):29.
|
47 |
KITAYAMA S, YOKOYAMA M, TAKANO M, et al. Multi⁃objective optimization of variable packing pressure profile and process parameters in plastic injection molding for minimizing warpage and cycle time[J]. The International Journal of Advanced Manufacturing Techno⁃logy, 2017, 92(9⁃12): 3 991⁃3 999.
|
48 |
KITAYAMA S, ONUKI R,YAMAZAKI K. Warpage reduction with variable pressure profile in plastic injection molding via sequential approximate optimization[J].The International Journal of Advanced Manufacturing Techno⁃logy, 2014, 72(5⁃8): 827⁃838.
|
49 |
KITAYAMA S, MIYAKAWA H, TAKANO M, et al. Multi⁃objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel[J]. The International Journal of Advanced Manufacturing Technology, 2016, 88(5⁃8): 1 735⁃1 744.
|
50 |
KITAYAMA S,NATSUME S. Multi⁃objective optimization of volume shrinkage and clamping force for plastic injection molding via sequential approximate optimization[J]. Simulation Modelling Practice and Theory, 2014, 48:35⁃44.
|
51 |
KITAYAMA S, TAMADA K, TAKANO M, et al. Numerical optimization of process parameters in plastic injection molding for minimizing weldlines and clamping force using conformal cooling channel[J]. Journal of Manufacturing Processes, 2018, 32:782⁃790.
|
52 |
FENG Q Q, LIU L Z ,ZHOU X H. Automated multi⁃objective optimization for thin⁃walled plastic products using taguchi, anova, and hybrid ann⁃moga[J]. The International Journal of Advanced Manufacturing Technology, 2019, 106(1/2): 559⁃575.
|
53 |
OUNPRASEUTH S T. Gaussian processes for machine learning[J]. Journal of the American Statistical Association, 2012, 103(481): 429⁃429.
|
54 |
ZHOU J,STURNG L. Process optimization of injection molding using an adaptive surrogate model with gaussian process approach[J]. Polymer Engineering & Science, 2007, 47(5): 684⁃694.
|
55 |
XIA W, LUO B,LIAO X P. An enhanced optimization approach based on gaussian process surrogate model for process control in injection molding[J]. The International Journal of Advanced Manufacturing Technology, 2011, 56(9⁃12): 929⁃942.
|
56 |
WANG X, LI H, GU J, et al. Pressure analysis of dynamic injection molding and process parameter optimization for reducing warpage of injection molded products[J]. Polymers (Basel), 2017, 9(3):85.
|
57 |
LUO L, YAO Y, GAO F, et al. Mixed⁃effects gaussian process modeling approach with application in injection molding processes[J]. Journal of Process Control, 2018, 62:37⁃43.
|
58 |
ZHAO P, DONG Z, ZHANG J, et al. Optimization of injection⁃molding process parameters for weight control: converting optimization problem to classification problem[J]. Advances in Polymer Technology, 2020:7 654 249.
|
59 |
YU S, ZHANG Y, YANG D, et al. Offline prediction of process windows for robust injection molding[J]. Journal of Applied Polymer Science, 2014, 131(18):40 804.
|
60 |
TRIPATHI S , CHRISRIANMITTERMAYR,MUHR D,JODLBAUER H. Large scale predictability analysis of process variables from injection molding machines[J]. Procedia Computer Science,2021,180:545⁃560.
|