[1] |
ZHANG Lin, XIA Zhangchuan, HE Yadong, XIN Chunling, WANG Ruixue, REN Feng.
Influence of gas flow of plasma jet carrier on modification effect for glass fiber
[J]. China Plastics, 2022, 36(9): 7-15.
|
[2] |
YANG Jin, CHEN Pengran, GAO Peixin.
Preparation and flame-retardant mechanism of epoxy foams synergistically modified with DIDOPO and POSS/EG
[J]. China Plastics, 2022, 36(9): 38-45.
|
[3] |
ZHANG Bing.
Study on test of oxidation induction time for random copolymer polypropylene pipe
[J]. China Plastics, 2022, 36(8): 107-109.
|
[4] |
ZHAO Hongjing, ZHU Jiang.
Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene
[J]. China Plastics, 2022, 36(8): 110-114.
|
[5] |
LIU Yi, WANG Ye, SUN Wei, QU Guoxing, XU Xia, YANG Shaolin, YUAN Ning.
Determination of content of transparent nucleating agent in polypropylene using infrared spectroscopy
[J]. China Plastics, 2022, 36(8): 115-118.
|
[6] |
ZHANG Taozhong, CHEN Xiaolong, HAO Xiaoyu, YU Fujia.
Comparison of mechanical properties and interfacial interactions of polypropylene composites filled with talc, calcium carbonate, and barium sulfate
[J]. China Plastics, 2022, 36(8): 36-41.
|
[7] |
WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu.
Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism
[J]. China Plastics, 2022, 36(7): 1-7.
|
[8] |
YU Changyong, XIN Zhong.
Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene
[J]. China Plastics, 2022, 36(7): 121-128.
|
[9] |
TAN Liqin, LIU Weiqu, LIANG Liyan, WANG Shuo, FENG Zhiqiang, LIN Jiaming.
Preparation and performance of epoxy resin modified with mercaptan polysiloxane
[J]. China Plastics, 2022, 36(7): 21-29.
|
[10] |
LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei.
Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding
[J]. China Plastics, 2022, 36(7): 37-43.
|
[11] |
XU Jie, ZHONG Jinfu, TONG Xiaoqian, LI Guangfu, FU Dongliang, LI Chengcheng.
Preparation and performance of carboxyl⁃terminated tannic acid/gallic acid⁃based epoxy composite
[J]. China Plastics, 2022, 36(7): 44-50.
|
[12] |
SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia.
Study on influence factors for determination of ethylene content in polypropylene powder
[J]. China Plastics, 2022, 36(6): 54-59.
|
[13] |
YI Huijun, TANG Ming, ZHANG Qingyi, BAI Yinna.
Study on properties of light⁃cured resin products for 3D printing
[J]. China Plastics, 2022, 36(5): 43-46.
|
[14] |
XU Weihua, ZHENG Yu, SHEN Xiangyang, ZHANG Yan, LIU Juwen, YAN Shijing.
Effects of different POSS on properties of phosphorus⁃silicon synergistic flame retardant epoxy resin
[J]. China Plastics, 2022, 36(4): 115-120.
|
[15] |
WANG Qingsong.
Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC
[J]. China Plastics, 2022, 36(4): 30-34.
|