An Observation at K 2016 for Development Trends of Injectionmolding Technology

doi:10.19491/j.issn.1001-9278.2017.01.001

Abstract

Abstract: This article described an observation at German K 2016—International Trade Fair for Plastics and Rubber for the worldwide development trends of some representative injectionmolding technologies, including intelligent manufacturing, lightweight and green manufacturing, high efficiency and precision, additive manufacturing, etc. The opportunities for the development of Chinese injectionmolding industry on the background of “Industry 4.0” and “Made in China 2025” were also proposed.

Key words: plastic, rubber, exhibition, injection molding, intelligent manufacturing, lightweight and green manufacturing

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	MIAO Dan, SONG Yuping, WANG Wenqian. Situation of China’s blow molding industry and tendency of key products， process and equipment during the period of “14th Five⁃Year Plan” [J]. China Plastics, 2022, 36(9): 57-62.
[3]	QUAN Shumiao, ZHANG Yanjun, SONG Xiaofei, DU Runping, YU Dan. Status and industrialization progress in dechlorination technologies for waste plastics [J]. China Plastics, 2022, 36(9): 122-130.
[4]	LIN Jianhui, LU Jiahui, WU Xinying, FAN Xueying, DENG Guirong, GAO Liang, MEI Chengfang, YANG Yonggang. Study of uncertainty evaluation in determination of ultimate aerobic biodegradability of degradable materials under controlled composting conditions [J]. China Plastics, 2022, 36(9): 140-147.
[5]	XU Yuxuan, DANG Kaifang, FU Nanhong, JIAO Xiaolong, XIE Pengcheng, YANG Weimin. Research progress in adaptive optimization technology for injection molding process [J]. China Plastics, 2022, 36(9): 180-186.
[6]	ZHAO Hongjing, ZHU Jiang. Study on numerical simulation of two⁃phase extrusion for micro/nano⁃laminated natural rubber/polypropylene [J]. China Plastics, 2022, 36(8): 110-114.
[7]	HU Chenguang, SU Hang, FENG Xiaoxin, DING Feng, LI Enshuo, FU Jiawei. Preparation and properties of waste glass⁃fiber⁃reinforced plastic⁃modified asphalt [J]. China Plastics, 2022, 36(8): 119-126.
[8]	MA Teng, LIU Qianqian, WEI Xiaoli, SONG Haitao, LI Mingfeng. Influence and countermeasures of silicon and chlorine impurities on waste plastic pyrolysis oil [J]. China Plastics, 2022, 36(8): 127-134.
[9]	BAI Shuiquan, BIAN Jiacheng, WANG Leyuan, YANG Jiahua, DENG Yafeng. Research progress in removal technologies of microplastics in water environment [J]. China Plastics, 2022, 36(8): 166-175.
[10]	XIONG Yiming, SONG Jiling, QIN Shuhao, LONG Xuebin, LU Xianrui. Preparation of modified thermoplastic starch and properties of its composite films with PBAT [J]. China Plastics, 2022, 36(8): 69-72.
[11]	PAN Shenglin, YANG Guibin, YUAN Min, FENG Yahui, HOU Jianjun, ZHANG Zhang, DAI Dongqing, ZHU Haiou, JIANG Yixin. Evolution direction of risk monitoring of cross⁃border recycled plastics under green and low carbon background [J]. China Plastics, 2022, 36(8): 98-106.
[12]	WANG Xiaodong, WANG Quan, CHEN Tuo, ZHENG Yue. Optimization of multi⁃objective parameters for double color injection⁃molding based on grey relational analysis and entropy weight method [J]. China Plastics, 2022, 36(7): 115-120.
[13]	FENG Bingtao, WANG Xiaoke, ZHANG Xin, SUN Guohua, WANG Dianlong, HOU Lianlong, MA Jinsong. Preparation and application of continuous carbon⁃fiber⁃reinforced thermoplastic composites [J]. China Plastics, 2022, 36(7): 165-173.
[14]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[15]	GUO Yuwen, ZENG Bei, GAO Xing, WANG Pan, REN Lianhai. Effect of PET microplastics on performance of co⁃digestion of sewage sludges and food wastes [J]. China Plastics, 2022, 36(7): 51-60.

An Observation at K 2016 for Development Trends of Injectionmolding Technology

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments