Research Progress in Crystallization Behavior of Polymers by Online Method Using Rotating Rheometers

doi:10.19491/j.issn.1001-9278.2018.01.003

[1]Wang L, Chen S. Crystallization Behaviors of Poly(vinylidene fluoride) and Poly(methyl methacrylate)-Block-Poly(2-vinyl pyridine) Block Copolymer Blends[J]. Journal of Thermal Analysis and Calorimetry, 2016,125(1):215-230.
[2]Ma W, Wang X, Zhang J. Crystallization Kinetics of Poly(vinylidene fluoride)/MMT, SiO2, CaCO3, or PTFE Nanocomposite by Differential Scanning Calorimeter[J]. Journal of Thermal Analysis and Calorimetry, 2011, 103(1):319-327.
[3]Musa N, Wong T W. Fast-Scan vs Conventional Differential Scanning Calorimetry (DSC) Techniques in Detection of Crystallization Events of Tolbutamide–Polyethylene Glycol Composite[J]. Journal of Thermal Analysis & Calorimetry, 2013, 111(3):2195-2202.
[4]Elmoumni A, Gonzalez-Ruiz R A, Coughlin E B, et al. Isotactic Poly(propylene) Crystallization: Role of Small Fractions of High or Low Molecular Weight Polymer[J]. Macromolecular Chemistry & Physics, 2005, 206(1):125–134.
[5]Cantalupo S A, Salvati H, Mcburney B, et al. Crystal Structures and Packing Motifs of 2,3-Diphenylquinoxaline and 2,3-Diphenylbenzo[ g ]Quinoxaline[J]. Journal of Chemical Crystallography, 2006, 36(1):17-24.
[6]孙福,钱建华,凌荣根,等. 导电炭黑/聚酯复合材料的等温结晶行为[J]. 纺织学报,2009,(11):24-28.
Sun Fu，Qian Jianhua,Ling Ronggen,et al.Isothermal Crystallization Behavior of Conductive Carbon Black/Polyester Composites[J].Journal of Textile Research, 2009,(11):24-28.
[7]海洋, 柳义, 陈西良,等. 小角X射线散射法测定高密度聚乙烯微观结构随温度的变化[J]. 高分子材料科学与工程, 2015, 31(9):117-121.
Hai Yang,Liu Yi,Chen Xiliang,et al. Small Angle X-Ray Scattering Measurements of HDPE Microstructure Evolution with Temperature [J].Polymer Materials Science and Engineering, 2015, 31(9):117-121.
[8]贾振华,李松伟,刘宪虎,等. 水辅注射成型聚丙烯制品的取向结晶[J]. 合成树脂及塑料,2011,(02):67-70.
Jia Zhenhua,Li Songwei,Liu Xianhu,et al. Crystalline Orientation of the Water-Assisted Injection Molded Polypropylene [J].China Synthetic Resin and Plastics, 2011,(02):67-70.
[9]于翔,陈尔强,朱诚身,等. 利用小角/广角X射线散射联用及一维相关函数分析研究聚(ε-己内酯)片晶的形态[J]. 高分子学报,2010,(09):001136-1142.
Yu Xiang,Chen Erqiang Zhu Chengshen,et al.Study of Lamelliar Morphology of Poly (ε-caprolactone) Based on ASXS/WAXS Simultaneous Measurement and One-dimensional Correlation Function Analysis[J].Acta Polymerica Sinica, 2010,(09):001136-1142.
[10]郭晓贝,关晓阳,秦怡靖,等. 熔体状态对等规聚丙烯结晶行为的影响[J]. 现代塑料加工应用,2016,28(5):1-4.
Guo Xiaobei,Guan Xiaoyang,Qing Yijing,et al.The Effect of Melt State on Crystallization Behavior of Isotactic Polypropylene[J].Modern Plastics Processing and Applications, 2016,28(5):1-4.
[11]Xu-juanLi,Gan-jiZhong,Zhong-mingLi.Non-Isothermal Crystallization of Poly(l-lactide)(plla) under Quiescent and Steady Shear Conditions[J]. 高分子科学(英文版), 2010, 28(3):357-366.
[12]H?fele A, Heck B, Kawai T, et al. Crystallization of a Poly(ethylene-co-octene): I A Precursor Structure and Two Competing Mechanisms[J]. The European Physical Journal E, 2005, 16(2):207.
[13]Khanna Y P. Rheological Mechanism and Overview of Nucleated Crystallization Kinetics[J]. Macromolecules, 1993, 26(26):3639-3643.
[14]钟勇. 聚乳酸及其碳纳米管复合物的结晶和流变行为的研究[D]. 中国科学技术大学, 2012.
[15]Lellinger, D., Floudas, G., Alig, I. Shear Induced Crystallization in Poly(ε-caprolactone):Effect of Shear Rate[J]. Polymer, 2003. 44(19):5759-5769.
[16]刘宏军,陈毅峰,陈俊,等. 剪切应力场对聚丙烯等温结晶的影响[J]. 广东化工,2012,39(12):91-92.
Liu Hongjun,Chen Yifeng,Chen Jun,et al. Effect of Shear Stress on Isothermal Crystallization of PP [J]. Guangdong Chemical Industry,2012,39(12):91-92. 2012,39(12):91-92.
[17]于逢源. 聚烯烃流动诱导结晶的流变学研究[D].上海交通大学,2009.
[18]李晓斌. 等规聚丙烯结晶行为研究[D].兰州理工大学,2016.
[19]Lin Y, Fan Y. Slippage and Shear Inhomogeneity in Shear-Induced Crystallization of Isotactic Polypropylene on Metal Substrates[J]. Rheol Acta, 2013,52(4):369-381.
[20]袁松. 聚丙烯/纳米颗粒复合材料流变及剪切诱导结晶行为研究[D].天津大学,2013.
[21]Chen Q, Fan Y, Zheng Q. Rheological Scaling and Modeling of Shear-Enhanced Crystallization Rate of Polypropylene[J]. Rheologica Acta, 2006,46(2):305-316.
[22]陈青,范毓润,郑强. 剪切流场诱导iPP等温结晶行为的研究[J]. 高分子学报,2007,1(5):467-471.
Chen Qing,Fan Yurun,Zheng Qiang. Shear-induced Crystallization of Isotactic Polypropylene [J].Acta Polymerica Sinica，2007,1(5):467-471.
[23]Najafi N, Heuzey M C, Carreau P, et al. Quiescent and Shear-Induced Crystallization of Linear and Branched Polylactides[J]. Rheologica Acta, 2015,54(9):1-15.
[24]方华高. 长链支化聚乳酸和增韧改性聚乳酸共混物的制备、结构表征及性能研究[D].中国科学技术大学,2014.
[25]焦青伟,吴蓉,邹国享,等. 剪切与PLA立构复合晶体协同对PLA结晶性能的影响[J]. 现代塑料加工应用,2016,28(02):37-40.
Jiao Qingwei,Wu Rong, Zou Guoxiang，et al. The Synergetic Effects of Shear and Stereocomplex Crystals on Crystallization Properties of Polylactic Acid [J].Modern Plastics Processing and Applications,2016,28(02):37-40.
[26]Arias A, Sojoudiasli H, Heuzey M C, et al. Rheological Study of Crystallization Behavior of Polylactide and Its Flax Fiber Composites[J]. Journal of Polymer Research, 2017,24(3):46.
[27]陈宏亮. 环状对苯二甲酸丁二醇酯低聚物及其石墨烯纳米复合材料的化学流变学和结晶行为研究[D].上海交通大学,2013.
[28]Derakhshandeh M, Hatzikiriakos S G. Flow-Induced Crystallization of High-Density Polyethylene: the Effects of Shear and Uniaxial Extension[J]. Rheologica Acta, 2012,51(4):315-327.
[29]Hadinata C, Gabriel C, Ruellmann M, et al. Correlation between the Gel Time and Quiescent/Quasi-Quiescent Crystallization onset Time of Poly(butene-1) as Determined from Rheological Methods[J]. Rheologica Acta, 2006,45(5):631-639.
[30]Iervolino R, Somma E, Nobile M R, et al. The Role of Multi-Walled Carbon Nanotubes in Shear Enhanced Crystallization of Isotactic Poly(1-butene)[J]. Journal of Thermal Analysis and Calorimetry, 2009,98(3):611.
[31]刘典新,郑强,李诚,等. 氯化钙对尼龙6/马来酸酐接枝乙烯-辛烯共聚物共混体系形态与结晶行为影响的流变学分析[J]. 高分子材料科学与工程,2014,30(7):90-95.
Liu Dianxin,Zheng Qiang,Li Cheng,et al. Effect of Calcium Chloride on Morphology and Crystallization Behavior of Polyamide 6/Maleic Anhydride Grafting Ethylene-Octene Copolymer Compounds by Dynamic Rheological Method[J]. Polymer Materials Science & Engineering,2014,30(7):90-95.

Research Progress in Crystallization Behavior of Polymers by Online Method Using Rotating Rheometers

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	JIAO Zhiwei, WANG Kechen, ZHANG Yang, YANG Weimin. Performance of PVC/ABS composites filled with carbon black and talc powders based on carbon nano coating deposition [J]. China Plastics, 2022, 36(8): 10-15.
[2]	ZHANG Bing. Study on test of oxidation induction time for random copolymer polypropylene pipe [J]. China Plastics, 2022, 36(8): 107-109.
[3]	YANG Yan, WANG Jie, LI Zongyu, WANG Yiming, WANG Yunnan, LI Shuijuan, LEI Liangcai, LI Haiying. A review for synthetic methods of hyperbranched ionic liquid polymers [J]. China Plastics, 2022, 36(8): 159-165.
[4]	FENG Kai, LI Yongqing, MA Xiuqing, HAN Ying. Research progress and application in toughening modification of polyoxymethylene [J]. China Plastics, 2022, 36(7): 157-164.
[5]	ZHU Zixuan, LIU Haifen, FAN Jiazhao, LI Huafeng, WANG Lixin. Research progress of adhesive materials and co⁃extrusion adhesion technology for photovoltaic backsheet [J]. China Plastics, 2022, 36(7): 174-186.
[6]	SONG Jin, XU Hang, ZOU Wei, WANG Hong, ZHANG Chen. Preparation and adsorption properties of surface⁃functionalized polyacrylate porous beads for Cu²⁺ [J]. China Plastics, 2022, 36(7): 8-13.
[7]	SHAO Linying, XI Yuewei, WENG Yunxuan. Research progress in degradation characteristics of poly（lactic acid） composites [J]. China Plastics, 2022, 36(6): 155-164.
[8]	YANG Xiaolong, CHEN Wenjing, LI Yongqing, YAN Xiaokun, WANG Xiulei, XIE Pengcheng, MA Xiuqing. Research progress in polymer/graphene conductive composites [J]. China Plastics, 2022, 36(6): 165-173.
[9]	SUN Qi, GAO Xing, CUI Xuemei, LIAN Huiqin, CUI Xiuguo, WANG Xiaodong. Research progress in development and applications of black phosphorene for flame retardancy of polymers [J]. China Plastics, 2022, 36(5): 133-139.
[10]	WEI Liao. Research progress in application of water⁃soluble polymer materials for oil and gas field fracturing [J]. China Plastics, 2022, 36(5): 149-157.
[11]	CHEN Sheng, LIANG Yingchao, WU Fangjuan, FANG Hui, FAN Xinfeng, CHEN Hui, WANG Yonggang. Preparation and interfacial modification of polyamide 6/bidirectional warp⁃knitted glass fiber composites [J]. China Plastics, 2022, 36(5): 24-28.
[12]	TIAN Chifeng, ZHANG Hongshen. Study on friction charge and high⁃voltage electrostatic separation of automotive polymer particles based on multi⁃fin friction bucket [J]. China Plastics, 2022, 36(5): 75-80.
[13]	CHEN Wenjing, YANG Xiaolong, HAN Shuntao, HAN Ying, MA Xiuqing. Research progress in modification methods of polyacrylonitrile materials [J]. China Plastics, 2022, 36(4): 158-165.
[14]	PENG Bo, XIAO Yunbin, GU Jiabao, CHEN Zijun, TANG Yanhuang, ZHU Gang, XU Huanxiang. Research progress in preparation and properties of polymer/graphene composites [J]. China Plastics, 2022, 36(4): 190-197.
[15]	LI Suyuan, LIU Huipeng, GONG Shun, HUANG Guotao, LI Yucai, WU Xin, DENG Jianping, PAN Kai. Preparation and characterization of EVA foaming materials modified with thermoplastic polyamide elastomer [J]. China Plastics, 2022, 36(4): 6-14.