Foaming of PP/PE-HD Blends and Its Working Mechanism#br#

China Plastics ›› 2007, Vol. 21 ›› Issue (2): 59-63.

Previous Articles Next Articles

Foaming of PP/PE-HD Blends and Its Working Mechanism#br#

ZHANG Ping，ZHOU Nan-qiao，LI Bing，CAO Xian-wu，WANG Ming-yi

National Engineering Research Center of Novel neering, Ministry of Education Equipment for Polymer Processing, Key South China University of Technology Laboratory of Polymer Processing Guangzhou 510640, China

Online:2007-02-26 Published:2021-03-18

Abstract

CLC Number:

TQ325.1十4

ZHANG Ping, ZHOU Nan-qiao, LI Bing, CAO Xian-wu, WANG Ming-yi. Foaming of PP/PE-HD Blends and Its Working Mechanism#br#[J]. China Plastics, 2007, 21(2): 59-63.

[1]	WU Wei, HU Huanbo, SHEN Hui, ZHAO Tianyu. Dual⁃synergistic effect of 4A zeolite and Ca⁃Mg⁃Al hydrotalcite on intumescent flame retardant PP and its mechanism [J]. China Plastics, 2022, 36(7): 1-7.
[2]	YU Changyong, XIN Zhong. Effect of α/β complex nucleating agent based on hexahydrophthalate on properties of polypropylene [J]. China Plastics, 2022, 36(7): 121-128.
[3]	LIU Yi, SUN Wei, QU Guoxing, WANG Ye, YUAN Ning, YANG Shaolin, XU Xia, CHANG Xiaoyi, ZHANG Yufei. Structure and performance analysis of transparent polypropylene special material for thin⁃wall injection molding [J]. China Plastics, 2022, 36(7): 37-43.
[4]	LEI Yujie, CHEN Minghuan, WANG Jieyao, CHEN Wangzhi, LI Lei. Cross⁃linked foaming process and performance of recycled polyethylene [J]. China Plastics, 2022, 36(6): 124-129.
[5]	SUN Wei, LIU Yi, LIAO Yunlong, CHEN Junjia. Study on influence factors for determination of ethylene content in polypropylene powder [J]. China Plastics, 2022, 36(6): 54-59.
[6]	ZHU Jingyun, YI Huijun, YAN Wei, LI Dawei. Research and development of polyethylene special materials for compound films [J]. China Plastics, 2022, 36(6): 77-80.
[7]	WANG Qingsong. Development of glass⁃fiber⁃reinforced polypropylene with high strength and low VOC [J]. China Plastics, 2022, 36(4): 30-34.
[8]	WANG Fuyu, GUO Jinqiang, ZHANG Yuxia. In⁃situ fibrillation methods of polymer blends and their application in PP⁃based blends [J]. China Plastics, 2022, 36(3): 146-156.
[9]	LI Rui, JIANG Yanfeng, WU Shuang, AN Yanjie, JIANG Zeyu, ZHANG Mingqiang. Microstructure and thermal characterization of polypropylene special material for cast films through temperature rising elution fractionation [J]. China Plastics, 2022, 36(3): 53-57.
[10]	CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun. Preparation and properties of five⁃layer co⁃extrusion barrier films [J]. China Plastics, 2022, 36(3): 64-68.
[11]	ZHAI Yujiao, XIN Chunling, HE Yadong, YAN Baorui, QIAO Linjun. Study on process parameters for filling process of polypropylene microcellular injection molding under supercritical N₂ [J]. China Plastics, 2022, 36(3): 69-74.
[12]	SONG Renda, WU Gaojian, CHEN Junxiang, ZHANG Youchen, YANG Weimin, XIE Pengcheng. Preparation and its electromagnetic shielding performance of PP/PET/CNTs foaming composites [J]. China Plastics, 2022, 36(2): 1-7.
[13]	LI Qiwei, WANG Cuicui, ZHENG Haijun, CHEN Jihe, WANG Ge, CHENG Haitao. Effects of multiple extrusions on mechanical and foaming properties of polypropylene/bamboo fiber composites [J]. China Plastics, 2022, 36(2): 56-60.
[14]	HUANG Wei, LIU Hesheng, HUANG Xingyuan, ZHANG Wei, KUANG Tangqing, CHEN Zhongshi. Study on high⁃pressure water penetration behavior of square cross⁃sectional pipes based on short⁃glass⁃fiber⁃reinforced polypropylene [J]. China Plastics, 2022, 36(2): 82-88.
[15]	WANG Xiaodong, HUA Lei, DONG Aijuan, LUO Lihua. Study on measurement method of gas evolution of foaming agent ADC based on thermogravimetric analysis [J]. China Plastics, 2022, 36(1): 142-147.

Foaming of PP/PE-HD Blends and Its Working Mechanism#br#

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments