Analysis of Standards of Plastics Piping Systems for Hot and Cold Water Installations and the Basic Calculation

doi:10.19491/j.issn.1001-9278.2010.08.022

China Plastics ›› 2010, Vol. 24 ›› Issue (08): 91-98 .DOI: 10.19491/j.issn.1001-9278.2010.08.022

Previous Articles Next Articles

Analysis of Standards of Plastics Piping Systems for Hot and Cold Water Installations and the Basic Calculation

XIE Jian-Ling

Received:2010-05-05 Revised:2010-07-01 Online:2010-08-26 Published:2010-08-26

Abstract

Abstract: The international standards and national standards and recent amending for plastic pressure piping systems for hot and cold water installation were introduced. Focusing on the properly designing and selecting technical parameters, calculation examples were provided to show how to determine the piping grade, level of pressure, and the pipe thickness.

Key words: hot and cold water, standard, plastics pipe, classification of service conditions, design stress, wall thickness, calculation

XIE Jian-Ling. Analysis of Standards of Plastics Piping Systems for Hot and Cold Water Installations and the Basic Calculation[J]. China Plastics, 2010, 24(08): 91-98 .

[1]	HU Xuechuan, FANG Jiahao, LI Youbing, ZHOU Jianjun, LI Li, ZHANG Jixiang, DENG Yajun, LIU Yuan. Injection defect analysis and molding optimization of high⁃gloss grille for an automobile [J]. China Plastics, 2022, 36(9): 70-73.
[2]	HE Anqi, HUANG Jian, ZHANG Ying, SUN Huali, XIANG Aimin, XU Haiyun. Pressure design of chlorinated poly（vinyl chloride） pipelines in sprinkler systems and comparative analysis of domestic and foreign standards [J]. China Plastics, 2022, 36(9): 131-139.
[3]	PENG Jing, XIAO Da, WU Yingjiang, LI Bing, ZHANG Long, LI Zegang. Comparative analysis of Chinese and international standards for plastics structured⁃wall drainpipes [J]. China Plastics, 2022, 36(4): 135-141.
[4]	YAO Yi, ZHANG Erjie, LU Changli, WANG Chaojun, JIAO Jian, ZENG Xiangbin. Influence of food contact regulations on the development of PBS [J]. China Plastics, 2022, 36(10): 125-130.
[5]	JIN Fujing, HAO Yunan, JIAO Hongwen, ZHAO Hongyu. Application and Standard Interpretation of Graphite⁃modified Extruded Polystyrene Foam Boards for Thermal Insulation of Building [J]. China Plastics, 2021, 35(9): 109-115.
[6]	DIAO Xiaoqian, WENG Yunxuan, FU Ye, ZHOU Yingxin. Review of Applications and Performance Evaluation Methods of Biodegradable Plastics [J]. China Plastics, 2021, 35(8): 152-161.
[7]	CHEN Xinqi, BAI Yun, LIU Shanshan, GAO Xia, LIU Weili, ZHANG Mei, WU Yuwei, HUANG Yan, ZHAO Hongliang. Determination of Polylactic Acid and Other Components in Biodegradable Plastics Using Quantitative ¹H⁃NMR Method [J]. China Plastics, 2021, 35(8): 181-188.
[8]	LI Yafei, CHEN Wenge, LUO Shaofeng. Analysis and Research of US Military Standard MIL⁃PRF⁃32002D [J]. China Plastics, 2021, 35(6): 93-99.
[9]	ZHONG Luohao, KUANG Tangqing, LAI Jiamei, LIU Hesheng, LAI Dewei. Effect of Molding Process on Wall Residual Thickness Distribution and Glass⁃fiber Orientation of Short⁃glass⁃fiber⁃reinforced Polypropylene Molded Pipes [J]. China Plastics, 2021, 35(5): 11-16.
[10]	JIANG Hong, ZHANG Lanze, LIU Jintong, YUAN Zhihao. Research on Clustering Plastic Steel Windows by X⁃ray Fluorescence Spectrometry Based on Species Difference [J]. China Plastics, 2021, 35(5): 72-78.
[11]	SHI Jianfeng, HU Anqi, ZHENG Jinyang. Development Status of Technical Standards in Polyethylene Piping [J]. China Plastics, 2021, 35(3): 112-123.
[12]	YUAN Zhihuan, KUANG Tangqing, LAI Jiamei, LIU Hesheng, XU Pan. Influence of Processing Parameters on Wall Thickness and Properties of Water⁃assisted Co⁃injection Molding Pipes of Polypropylene/Polyamide 6 Blends [J]. China Plastics, 2021, 35(11): 77-83.
[13]	LI Shao, WANG Xiaoxin, ZHOU Lehui, FU Nuofeng, ZHONG Jianquan. Research on the Influence of Plastic Viscosity and Product Thickness on Core Penetration Effect of Sandwich Injection Molding [J]. China Plastics, 2021, 35(10): 83-87.
[14]	WANG Yanqing, KUANG Tangqing, LAI Jiamei, FENG Qiang, LIU Wenwen. Effect of Projectile on Residual Wall Thickness of Water⁃projectile⁃assisted Injection Molded Pipes [J]. China Plastics, 2021, 35(1): 60-66.
[15]	Yan LI, Kejie YANG, Shan ZHANG, Tingyong HU. Study on Difference Between GB/T 1.1—2020 and GB/T 1.1—2009 [J]. China Plastics, 2020, 34(8): 85-94.

Analysis of Standards of Plastics Piping Systems for Hot and Cold Water Installations and the Basic Calculation

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments