中国塑料 ›› 2011, Vol. 25 ›› Issue (11): 66-69 .DOI: 10.19491/j.issn.1001-9278.2011.11.013

• 加工与应用 • 上一篇    下一篇

无卤阻燃聚丙烯的制备

苏吉英 孟成铭 汤俊杰 郭建鹏 段浩   

  1. 上海日之升新技术发展有限公司 上海日之升新技术发展有限公司 上海日之升新技术发展有限公司 上海日之升新技术发展有限公司
  • 收稿日期:2011-08-23 修回日期:2011-09-30 出版日期:2011-11-26 发布日期:2011-11-26

Research and Preparation of Halogen-free Flame Retardant Polypropylene

  

  • Received:2011-08-23 Revised:2011-09-30 Online:2011-11-26 Published:2011-11-26

摘要: 聚丙烯因密度小及优异的机械性能等特点,受到了人们的广泛关注和大力应用。但聚丙烯氧指数仅为17.8左右,容易发生火灾,其应用领域受到极大的限制。因此,聚丙烯的阻燃改性已经成为一个研究热点。本实验采用多聚磷酸铵(APP)、季戊四醇(PER)、三聚氰胺尿酸盐(MCA)作为无卤阻燃剂,调整三者比例,采用熔融共混挤出法制备了无卤阻燃聚丙烯,并研究了蒙脱土、相容剂以及矿物、玻纤的加入对材料性能的影响。

关键词: 聚丙烯, 无卤阻燃, 制备

Abstract: Discussing the mould shrinkage influence of different fillings, different content and POE, PE modified materials and nucleating agent, the results show that significant improvement compared with both filler composite shrinkage, in which glass fiber the most remarkable improvement, with the filler and shrinkage increase the amount of fill decreases, adding nucleating agents also can improve the mould shrinkage.

Key words: polypropylene, halogen-free flame retardant, preparation