
《中国塑料》编辑部 ©2008-2024 版权所有
地址:北京市海淀区阜成路11号 邮编:100048
编辑部:010-68985541 联系信箱:cp@plaschina.com.cn
广告部/发行部:010-68985253 本系统由北京玛格泰克科技发展有限公司设计开发
中国塑料 ›› 2024, Vol. 38 ›› Issue (3): 26-30.DOI: 10.19491/j.issn.1001-9278.2024.03.005
陈炽盛1(), 杨帅2, 张建军1, 郭齐泰1, 蔡瑗1, 马素德1(
)
收稿日期:
2023-08-10
出版日期:
2024-03-26
发布日期:
2024-03-28
通讯作者:
马素德(1976—),男,工学博士,教授,主要从事新型环保及功能涂料的研究, masude2007@163.com作者简介:
陈炽盛(1999—),男,硕士研究生,主要研究方向为高分子材料,389359713@qq.com
CHEN Chisheng1(), YANG Shuai2, ZHANG Jianjun1, GUO Qitai1, CAI Yuan1, MA Sude1(
)
Received:
2023-08-10
Online:
2024-03-26
Published:
2024-03-28
Contact:
MA Sude
E-mail:389359713@qq.com;masude2007@163.com
摘要:
以聚丙烯为基体,以提钛尾渣为无机填料,γ⁃甲基丙烯酰氧基丙基三甲氧基硅烷(KH⁃570)为改性剂,通过熔融共混法制备聚丙烯/提钛尾渣复合材料。利用万能试验机、扫描电子显微镜、差示扫描量热仪等测试复合材料的性能并探究其各种影响因素。结果表明,复合材料的拉伸强度与提钛尾渣添加量成反比;对提钛尾渣的水洗可以有效提高复合材料体系的拉伸强度;改性后尾渣在基体中分散性更好,以其制备的复合材料样品拉伸强度优于未改性样品,亲油性增强,亲水性变差;经筛选分级后提钛尾渣的粒径分布更加均匀,拉伸强度在添加量为10 %、30 %时性能均大于未筛选复合体系。
中图分类号:
陈炽盛, 杨帅, 张建军, 郭齐泰, 蔡瑗, 马素德. 提钛尾渣对聚丙烯材料力学性能的影响[J]. 中国塑料, 2024, 38(3): 26-30.
CHEN Chisheng, YANG Shuai, ZHANG Jianjun, GUO Qitai, CAI Yuan, MA Sude. Effect of titanium tailings on mechanical properties of polypropylene materials[J]. China Plastics, 2024, 38(3): 26-30.
成分 | 含量/% |
---|---|
FeO | 1.63 |
SiO2 | 27.75 |
Al2O3 | 15.14 |
CaO | 26.86 |
MgO | 8.01 |
MgCl2 | 3.17 |
CaCl2 | 0.98 |
FeCl3 | 1.09 |
TiC | 3.14 |
TiO2 | 4.15 |
C | 4.7 |
S | 0.52 |
V | 0.06 |
TTi | 5.3 |
TFe | 1.6 |
Cl⁃ | 4 |
成分 | 含量/% |
---|---|
FeO | 1.63 |
SiO2 | 27.75 |
Al2O3 | 15.14 |
CaO | 26.86 |
MgO | 8.01 |
MgCl2 | 3.17 |
CaCl2 | 0.98 |
FeCl3 | 1.09 |
TiC | 3.14 |
TiO2 | 4.15 |
C | 4.7 |
S | 0.52 |
V | 0.06 |
TTi | 5.3 |
TFe | 1.6 |
Cl⁃ | 4 |
1 | 丁满堂.高钛高炉渣利用研究现状[J].四川冶金,2016,38(03):1⁃5. |
DING M T. Research status of utilization of high titanium blast furnace slag [J]. Sichuan Metallurgy,2016,38(03):1⁃5. | |
2 | Sunil Kumar Tripathy, Dasu Jayalaxmi, Rama Murthy Y, et al. Utilisation perspective on water quenched and air⁃cooled blast furnace slags[J].Journal of Cleaner Production,2020,262:121354. |
3 | 张青松,高利坤,陈晓鸣,等.含钛高炉渣提钛技术研究进展[J].化工矿物与加工,2023(03):1⁃12. |
ZHANG Q S, GAO L K, CHEN X M, et al. Research progress of titanium extraction from titanium⁃containing blast furnace slag [J]. Chemical Minerals and Processing,2023(03):1⁃12. | |
4 | 胡志波,陈 桃,张子浩,等.攀西地区含钛高炉渣中钛的分选研究[J].化工矿物与加工,2021,50(10):18⁃21. |
HU Z B, Chen T, ZHANG Z H, et al. Study on the separation of titanium from titanium⁃bearing blast furnace slag in Panxi area [J]. Chemical Minerals and Processing,2021,50(10):18⁃21. | |
5 | 田 鹏,董洪旺,武献民,等.钢铁渣综合利用现状及管控措施[J].冶金能源,2020,39(05):9⁃13. |
TIAN P, DONG H W, WU X M, et al. Status quo and control measures of comprehensive utilization of iron and steel slag [J]. Metallurgical Energy,2020,39(05):9⁃13. | |
6 | 惠翠萍. 提钛尾渣的综合利用[D].上海:上海大学,2019. |
7 | 陆 平.攀钢高炉渣综合利用产业化研究进展及前景分析[J].钢铁钒钛,2013,34(03):33⁃38. |
LU P. Research progress and prospect analysis of industrialization of comprehensive utilization of BLast⁃furnace slag in Pangang [J]. Steel,2013,34(03):33⁃38. | |
8 | 龙盘忠.高炉渣提钛尾渣除氯试验研究[J].钢铁钒钛,2014,35(03):42⁃45. |
LONG P Z. Experimental study on removal of chlorine from tailings of titanium extraction from blast⁃furnace slag [J]. Iron and Steel,2014,35(03):42⁃45. | |
9 | 莫培根,陈钧珊.高爐型釱渣的粘度、熔化性和矿物组成[J].金属学报,1964(04):363⁃375. |
MO P G, CHEN J S. Viscosity, melting property and Mineral Composition of slag in Blast furnace [J]. Acta Metallurgica Sinica,1964(04):363⁃375. | |
10 | 陈啸洋. 提钛尾渣在氯氧镁/硫氧镁水泥中的应用[D].沈阳:辽宁科技大学,2019. |
11 | 张玖福. 利用提钛尾渣及钛石膏制备建筑材料的研究[D].成都:西南科技大学,2018. |
12 | 洪远远. 提钛尾渣制备铁铝酸盐水泥熟料及其性能研究[D].武汉:武汉科技大学,2014. |
13 | 王景然,柯昌明,张锦化.提钛尾渣对硅酸盐水泥水化性能的影响[J].硅酸盐通报,2020,39(05):1 511⁃1 516. |
WANG J R, KE C M, ZHANG J H. Effect of titanium tailings removal on hydration properties of Portland cement [J]. Bulletin of Portland, 2019,39(05):1 511⁃1 516. | |
14 | 景建发,郭宇峰,郑富强,等.含钛高炉渣综合利用的研究进展[J].金属矿山,2018(04):185⁃191. |
JING J F, GUO Y F, ZHENG F Q, XIE X L, YANG L Z, CHEN F. Research progress on comprehensive utilization of titanium⁃containing blast furnace slag [J]. Metal Mine,2018(04):185⁃191. | |
15 | 蒲龙映,彭青松,李乐军.含钛高炉渣综合利用研究现状与展望[J].环境生态学,2022,4(Z1):106⁃110. |
PU L Y, PENG Q S, LI L J. Research status and prospect of comprehensive utilization of titanium⁃containing blast furnace slag [J]. Environmental Ecology,2022,4(Z1):106⁃110. | |
16 | 罗红莹,罗培强,王 攀,等.含钛高炉渣资源化利用研究进展概述[J].资源节约与环保,2022(12):136⁃140. |
LUO H Y, LUO P Q, WANG P, PENG Q S. Research progress on resource utilization of titanium⁃containing blast furnace slag [J]. Resource Conservation and Environmental Protection,2022(12):136⁃140. | |
17 | Zhang Jindong, Wang Wencai, Liu Gang, et al. Molding process and properties of polyimide⁃fiber⁃fabric⁃reinforced polyether ether ketone composites[J]. Journal of Polymer Engineering,2022,42(9). |
18 | Okhlopkova A A, Danilova S N, Dyakonov A A, et al. Polymer composite materials based on ultra⁃high molecular weight polyethylene[J]. IOP Conference Series: Materials Science and Engineering,2021,1060(1). |
19 | Shcherbina N A, Taganova V A, Bychkova E V, et al. The study of the structure and properties of nanostructured biodegradable thermoplastic composite[J]. Vestnik Voronežskogo Gosudarstvennogo Universiteta Inženernyh Tehnologij,2018,80(2). |
20 | Lu Ping. Progress and prospect of industrialization of comprehensive utilization of Pangang blast furnace slag ( high titanium content)]J].Irion Steel Vanadium Titanium,2013,34(3):33⁃38. |
21 | 毕冬冬. 聚丙烯增强、增韧改性研究[D].大连:大连理工大学,2012. |
22 | 任显诚,白兰英,王贵恒,等.纳米级CaCO3粒子增韧增强聚丙烯的研究[J].中国塑料,2000(01):26⁃30. |
REN X C, BAI L Y, WANG G H, et al. Study on toughening and strengthening polypropylene by nano⁃sized CaCO3 particles [J]. China Plastics,2000(01):26⁃30. | |
23 | 吴 磊,何雪莲,刘柏平.纳米CaCO3增强增韧PP/弹性体复合材料的研究[J].工程塑料应用,2016,44(04):1⁃6. |
WU L, HE X L, LIU B P. Study on nano⁃CACO3 reinforced and toughened PP/ elastomer composites [J]. Application of Engineering Plastics,2016,44(04):1⁃6. | |
24 | 焦 洋,吴佳静,焦 健.PP/CaCO3复合材料的制备及用于加固混凝土抗弯性能的研究[J].塑料科技,2021,49(06):11⁃14. |
JIAO Y, WU J J, JIAO J. Study on the preparation of PP/CaCO3 composites and their application to the flexural performance of reinforced concrete [J]. Plastic Science and Technology, 2019,49(06):11⁃14. | |
25 | 关远华,陈 招.聚丙烯材料生产过程中增韧改性效果研究[J].当代化工,2023,52(05):1 052⁃1 056. |
GUAN Y H, CHEN Z. Study on the toughening and modification effect of polypropylene in the production process [J]. Contemporary Chemical Industry,2023,52(05):1 052⁃1 056. | |
26 | Du Hainan, Yu Zhang, Hong Liu, et al. Influence of phase morphology and crystalline structure on the toughness of rubber⁃toughened isotatic polypropylene blends[J]. Polymer,2014,55(19). |
27 | Geng Chengzhen, Su Juanjuan, Han Songjia, et al. Hierarchical structure and unique impact behavior of polypropylene/ethylene⁃octene copolymer blends as obtained via dynamic packing injection molding[J]. Polymer,2013,54(13). |
28 | Liu Zhichun. Preparation of defect⁃free alumina insulation film using layer⁃by⁃layer electrohydrodynamic jet deposition for high temperature applications[J]. Ceramics International,2021,47(10PA) : 14 498⁃14 505. |
29 | 马千柱,李 广,李世杰.高速动车组牵引电机匝间绝缘的纳米氧化铝制备及性能分析[J].粘接,2022,49(02):49⁃52. |
MA Q Z, LI G, LI S J. Preparation and performance analysis of interturn insulation of high speed EMU traction motor by nano⁃alumina [J]. Journal of Bonding, 2019,49(02):49⁃52. |
[1] | 周子玉, 桑晓明, 耿旭, 肖晓红, 黄晓祥, 陈兴刚. 对位芳纶短切纤维对聚苯腈树脂力学性能的影响[J]. 中国塑料, 2024, 38(3): 13-17. |
[2] | 孙吉书, 濮夏天, 杨凯, 靳灿章. 硅烷偶联剂改性蒙脱土/SBS/HVA高黏改性沥青最佳掺量确定及其性能评价[J]. 中国塑料, 2024, 38(3): 18-25. |
[3] | 陈炽盛 杨帅 张建军 郭齐泰 蔡瑗 马素德. 提钛尾渣对聚丙烯材料力学性能的影响[J]. , 2024, 38(3): 26-30. |
[4] | 孙吉书 濮夏天 杨凯 靳灿章. 硅烷偶联剂改性蒙脱土/SBS/HVA高黏改性沥青最佳掺量确定及其性能评价[J]. , 2024, 38(3): 18-25. |
[5] | 周子玉 桑晓明 耿旭 肖晓红 黄晓祥 陈兴刚. 对位芳纶短切纤维对聚苯腈树脂力学性能的影响[J]. , 2024, 38(3): 13-17. |
[6] | 孔子萌, 张简, 邓雅馨, 徐雪玲, 陈雅君. 阻燃聚丁二酸丁二醇酯的研究进展[J]. 中国塑料, 2024, 38(2): 105-117. |
[7] | 阮芳涛, 吴浩, 朱金伟, 苏永生, 陈焯琳, 王国峰, 王洪杰. TEOS改性和长秸秆纤维取向对PP/SF复合材料性能的影响[J]. 中国塑料, 2024, 38(2): 14-19. |
[8] | 陈清江, 董志聪, 李红发, 吴毅江, 高松, 聂文翔, 罗应文. 改性纳米氧化镁交联聚乙烯复合材料的制备及其电气性能研究[J]. 中国塑料, 2024, 38(2): 20-25. |
[9] | 赵川涛, 贾志欣, 刘立君, 李继强, 张臣臣, 荣迪, 高利珍, 王少峰. 环氧树脂/碳纤维复合材料模压制品力学性能影响因素分析[J]. 中国塑料, 2024, 38(2): 26-32. |
[10] | 戚士界, 游翔宇, 王瑞晨, 周琳菲, 张慧洁. 高木质素含量聚乳酸共混材料的制备及其性能研究[J]. 中国塑料, 2024, 38(2): 45-51. |
[11] | 谭晶, 王智, 王朔, 付宏岩, 李长金, 李好义, 杨卫民, 张杨. 树枝状聚合物对聚乳酸熔体微分电纺纤维膜的增韧改性研究[J]. 中国塑料, 2024, 38(2): 7-13. |
[12] | 马秀清, 劳志超, 李明谦, 韩顺涛, 胡楠. 3D打印工艺参数对PLA/PTW共混物力学性能影响的研究[J]. 中国塑料, 2024, 38(2): 70-75. |
[13] | 李先铭, 张宁, 李改花, 刘爽, 刘征原. 十二烷基硫酸钠表面改性水滑石对PVC热稳定性能的影响[J]. 中国塑料, 2024, 38(2): 82-86. |
[14] | 张小娟, 杨可欣, 郭嘉乾, 雷阳, 方长青. 改性聚醚醚酮在气调包装膜领域的研究进展[J]. 中国塑料, 2024, 38(2): 95-104. |
[15] | 曾媛, 李亮, 刘威, 马晶晶, 刘让同. 海藻酸钠/聚丙烯酰胺复合水凝胶的壳聚糖增韧[J]. 中国塑料, 2024, 38(1): 42-48. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||