Research progress in polymer centrifugal electrospinning

doi:10.19491/j.issn.1001-9278.2022.01.025

Abstract

Abstract:

The working principle of centrifugal electrostatic spinning technology was briefly described， and the recent research progress of centrifugal electrostatic spinning at home and abroad was reviewed. The fiber formation mechanism of centrifugal electrostatic spinning was summarized， and the centrifugal electrostatic spinning was divided into two categories according to the characteristics of spinning materials： solution centrifugal electrostatic spinning and melt centrifugal electrostatic spinning. The device and process innovations of these two types of spinning methods were classified， and the structural characteristics and advantages and disadvantages of various devices were summarized. Furthermore， their process parameters were analyzed. Finally， the applications of centrifugal electrostatic spinning of micro and nano fibers were briefly described， and the problems in centrifugal electrostatic spinning and the future development trend were analyzed.

Key words: centrifugal electrospinning, nanofiber, polymer

CLC Number:

TQ320.66

AN Ying, LIU Yuliang, TAN Jing, YANG Weiming, YAN Hua, LI Haoyi. Research progress in polymer centrifugal electrospinning[J]. China Plastics, 2022, 36(1): 172-177.

Figures/Tables 8

Fig.1. Schematic diagram of centrifugal electrospinning device

Fig.2. Right?angle needle type centrifugal electrospinning device

Fig.3. Centrifugal spinning disk that can eliminate bubbles

Fig.4. Multi?chamber centrifugal electrospinning device

Fig.5. Bell?mouth type centrifugal sprinkler

Fig.6. Melt centrifugal electrospinning device

Fig.7. Centrifugal coaxial electrospinning device

Fig.8. Melt differential high?speed centrifugal electrospinning device

References 42

1	RAMAKRISHNA S， JOSE R， ARCHANA P， et al. Science and engineering of electrospun nanofibers for advances in clean energy， water filtration， and regenerative medicine ［J］. Journal of materials science， 2010， 45： 6 283⁃6 312.
2	BAGBI Y， PANDEY A， SOLANKI P R. Electrospun nanofibrous filtration membranes for heavy metals and dye removal ［M］. Elsevier：Nanoscale Materials in Water Purification， 2019： 275⁃288.
3	WANG Z， LI Z， JIANG T， et al. Ultrasensitive hydrogen sensor based on Pd⁰⁃loaded SnO₂electrospun nanofibers at room temperature ［J］. ACS Applied Materials &Interfaces， 2013，（5）： 2 013⁃2 021.
4	REZVANI Z， VENUGOPAL J R， URBANSKA A M， et al. A bird's eye view on the use of electrospun nanofibrous scaffolds for bone tissue engineering： current state⁃of⁃the⁃art， emerging directions and future trends ［J］. Nanomedicine： Nanotechnology， Biology and Medicine， 2016， 12： 2 181⁃2 200.
5	尹佳一. 基于嵌段共聚物自组装制备多孔纳米纤维的研究［D］. 深圳：深圳大学， 2019.
6	汪鑫. 模板法宏量制备纳米酚醛树脂基复合材料及功能化研究［D］. 合肥：中国科学技术大学， 2015.
7	黄鑫. 热致相分离法制备聚4⁃甲基⁃1⁃戊烯中空纤维膜及其表面血液相容性改性［D］. 南京：南京大学， 2016.
8	TEO W E， RAMAKRISHNA S. A Review on electrospinning design and nanofibre assemblies ［J］. Nanotechnology， 2006， 17： 89.
9	YU D G， WANG M， LI X， et al. Multifluid electrospinning for the generation of complex nanostructures ［J］. Wiley Interdisciplinary Reviews： Nanomedicine and Nanobiotechnology， 2020， 12： 1 601.
10	ZHANG Q， WU X， CHEN H， et al. Preparation and photoelectric properties of indium tin oxide depositional optical fiber by centrifugal spinning ［J］. Journal of Materials Science： Materials in Electronics， 2015， 26： 9 031⁃9 036.
11	HOU T， LI X， LU Y， et al. Highly porous fibers prepared by centrifugal spinning ［J］. Materials Design， 2017， 114： 303⁃311.
12	STEMPIEŃ Z， GNIOTEK K， ZIĘBA J， et al. Textile⁃based printed electrodes for muscles electrostimulation ［C］//Fiber SocietySpring （2011） Conference. Hong Kong：2011.
13	ZHANG X， LU Y. Centrifugal spinning： an alternative approach to fabricate nanofibers at high speed and low cost ［J］. Polymer Reviews， 2014， 54： 677⁃701.
14	CHANG W M， WANG C C， CHEN C Y. The combination of electrospinning and forcespinning： effects on a viscoelastic jet and a single nanofiber ［J］. Chemical Engineering Journal， 2014， 244： 540⁃551.
15	李凯丽，薛莲，刘勇. 离心静电纺丝旋转接收装置电场分布模拟［J］. 北京化工大学学报（自然科学版）， 2018， 45（3）： 72⁃78.
	LI K L，XUE L，LIU Y. Simulation of electric field distribution in a centrifugal electro⁃spinning rotating receiver ［J］. Journal of Beijing University of Chemical Technology （ Natural Science），2018，45（3）： 72⁃78.
16	李凯丽. 离心熔体静电纺丝模拟及实验探究［D］. 北京：北京化工大学， 2019.
17	余韶阳. 熔体离心电纺成纤机制及聚苯硫醚（PPS）超细纤维制备［D］. 北京：北京化工大学， 2019.
18	ANDRADY A L， ENSOR D S， NEWSOME R J. Electrospinning of fibers using a rotatable spray head：United States，US7134857［P］.2006⁃11⁃14.
19	LIAO C C， WANG C C， SHIH K C， et al. Electrospinning fabrication of partially crystalline bisphenol a polycarbonate nanofibers： effects on conformation， crystallinity， and mechanical properties ［J］. European Polymer Journal， 2011， 47： 911⁃924.
20	LI M， LONG Y Z， YANG D， et al. Fabrication of one dimensional superfine polymer fibers by double⁃spinning ［J］. Journal of Materials Chemistry， 2011， 21： 13 159⁃13 162.
21	GREENAWALT F E. Centrifugal electrospinning process：United States，US9988742［P］.2018⁃06⁃05.
22	김철기， 김성진. 원심 전기방사 장치：대한민국，KR20180062210A［P］.2018⁃06⁃08.
	KIM C G， KIM S J. Centrifugal electrospinning device： South Korea， KR20180062210A ［P］. 2018⁃06⁃08.
23	김성진， 김철기. 방열형 원심전기방사 장치：대한민국，KR101979881B1［P］.2019⁃05⁃17.
	KIM S J， K C G. Electrospinning device for radiant heat ring： South Korea， KR101979881B1 ［P］. 2019⁃05⁃17.
24	WANG L， AHMAD Z， HUANG J， et al. Multi⁃compartment centrifugal electrospinning based composite fibers ［J］. Chemical Engineering Journal， 2017， 330： 541⁃549
25	WANG L， WANG B， AHMAD Z， et al. Dual rotation centrifugal electrospinning： a novel approach to engineer multi⁃directional and layered fiber composite matrices ［J］. Drug Delivery and Translational Research， 2019（9）： 204⁃214.
26	李申，王晗，王瑞洲，等. 一种离心静电纺丝装置：CN110219060A ［P］.2019⁃06⁃26.
27	MULLER F， JOKISCH S， BARGEL H， et al. Centrifugal electrospinning enables the production of meshes of ultrathin polymer fibers ［J］. ACS Applied Polymer Materials， 2020（2）： 4 360⁃4 367.
28	EDMONDSON D， COOPER A， JANA S， et al. Centrifugal electrospinning of highly aligned polymer nanofibers over a large area ［J］. Journal of Materials Chemistry， 2012， 22： 18 646⁃18 652.
29	孟庆龙. 无针尖离心电纺聚偏氟乙烯复合纤维膜及其性能研究［D］. 厦门：厦门大学， 2018.
30	杨朋，王晗，陈新，等. 一种离心静电纺丝装置：CN110144632A ［P］.2019⁃08⁃20.
31	刘术亮，黄渊源，韩玉梅，等. 离心静电纺丝法制备有序、交叉以及绞线结构的荧光纳米纤维［J］. 青岛大学学报（自然科学版）， 2013，26（1）： 44⁃49.
	LIU S L，HUANG Y Y，HAN Y M，et al. Fabrication of fluorescent nanofibers of aligned arrays， two⁃layer grid⁃patterns and nanoropes via electrospinning ［J］. Journal of Qingdao University （Natural Science Edition），2013，26（1）：44⁃49.
32	王晗，徐文杰，曾俊，等. 一种离心静电纺丝装置：CN110656383A ［P］.2019⁃10⁃24.
33	LI J， GUO Q， SHI J， et al. Preparation of Ni nanoparticle⁃doped carbon fibers ［J］. Carbon， 2012， 50： 2 045⁃2 047.
34	刘勇，李秀红，何红，等. 一种离心熔体静电纺丝装置：CN104088024B ［P］.2014⁃07⁃10.
35	刘勇，张敬男. 一种离心同轴静电纺丝机：CN105369369B ［P］.2016⁃03⁃02.
36	李守猛，伍先安，丁玉梅，等. 聚丙烯熔体微分离心静电纺丝工艺初探［J］. 上海纺织科技， 2018， 46： 20⁃22，33.
	LI S M，WU X A，DING Y M，et al. Preliminary study on microfine centrifugal electrospinning of PP melt ［J］. Shanghai Textile Science & Technology，2018，46：20⁃22，33.
37	张有忱，李小虎，钟祥烽，等. 一种离心静电纺纳米捻线高速制备装置及工艺：CN103409861B ［P］.2015⁃10⁃28.
38	杨卫民，马小路，李好义，等. 一种磁悬浮式离心静电纺丝装置：CN105755557B ［P］.2016⁃07⁃13.
39	刘宇健. 基于熔体微分的纳米纤维捻线制备方法及实验研究［D］. 北京；北京化工大学， 2020.
40	张智明，赖梓龙，陈博雅，等. 一种离心静电纺丝相结合的纳米纤维制取系统：CN108893791B ［P］.2018⁃06⁃27.
41	WU S， PENG H， LI X， et al. Effect of scaffold morpho⁃logy and cell co⁃culture on tenogenic differentiation of hadmsc on centrifugal melt electrospun poly （L‑lactic acid） fibrous meshes ［J］. Biofabrication， 2017， 9： 044106
42	SHAIKH M O， HUANG Y B， WANG C C， et al. Wearable woven triboelectric nanogenerator utilizing electrospun PVDF nanofibers for mechanical energy harves⁃ting ［J］. Micromachines （Basel）， 2019， 10： 438.

[1]	ZHU Zixuan, LIU Haifen, FAN Jiazhao, LI Huafeng, WANG Lixin. Research progress of adhesive materials and co⁃extrusion adhesion technology for photovoltaic backsheet [J]. China Plastics, 2022, 36(7): 174-186.
[2]	ZHOU Shuyi, ZHU Min, LIU Yiying, CAO Shuhui, CAI Qixuan, NIE Hui, ZHANG Yuxia, ZHOU Hongfu. Research progress in polymer⁃based hemostatic materials [J]. China Plastics, 2022, 36(7): 74-84.
[3]	SONG Jin, XU Hang, ZOU Wei, WANG Hong, ZHANG Chen. Preparation and adsorption properties of surface⁃functionalized polyacrylate porous beads for Cu²⁺ [J]. China Plastics, 2022, 36(7): 8-13.
[4]	SHAO Linying, XI Yuewei, WENG Yunxuan. Research progress in degradation characteristics of poly（lactic acid） composites [J]. China Plastics, 2022, 36(6): 155-164.
[5]	YANG Xiaolong, CHEN Wenjing, LI Yongqing, YAN Xiaokun, WANG Xiulei, XIE Pengcheng, MA Xiuqing. Research progress in polymer/graphene conductive composites [J]. China Plastics, 2022, 36(6): 165-173.
[6]	SUN Qi, GAO Xing, CUI Xuemei, LIAN Huiqin, CUI Xiuguo, WANG Xiaodong. Research progress in development and applications of black phosphorene for flame retardancy of polymers [J]. China Plastics, 2022, 36(5): 133-139.
[7]	WEI Liao. Research progress in application of water⁃soluble polymer materials for oil and gas field fracturing [J]. China Plastics, 2022, 36(5): 149-157.
[8]	CHEN Sheng, LIANG Yingchao, WU Fangjuan, FANG Hui, FAN Xinfeng, CHEN Hui, WANG Yonggang. Preparation and interfacial modification of polyamide 6/bidirectional warp⁃knitted glass fiber composites [J]. China Plastics, 2022, 36(5): 24-28.
[9]	TIAN Chifeng, ZHANG Hongshen. Study on friction charge and high⁃voltage electrostatic separation of automotive polymer particles based on multi⁃fin friction bucket [J]. China Plastics, 2022, 36(5): 75-80.
[10]	PENG Bo, XIAO Yunbin, GU Jiabao, CHEN Zijun, TANG Yanhuang, ZHU Gang, XU Huanxiang. Research progress in preparation and properties of polymer/graphene composites [J]. China Plastics, 2022, 36(4): 190-197.
[11]	LI Suyuan, LIU Huipeng, GONG Shun, HUANG Guotao, LI Yucai, WU Xin, DENG Jianping, PAN Kai. Preparation and characterization of EVA foaming materials modified with thermoplastic polyamide elastomer [J]. China Plastics, 2022, 36(4): 6-14.
[12]	SONG Lijian, ZHANG Youchen, ZUO Xiahua, ZHANG Zhenghe, AN Ying, YANG Weimin, TAN Jing, CHENG Lisheng. Research progress on interfacial thermal transport controlled by self⁃assembled monolayers [J]. China Plastics, 2022, 36(4): 60-69.
[13]	CHENG Manfang, BAI Jifeng, WANG Wenqing, LEI Liangcai, LI Haiying, HAN Xiangyan, HU Yuexin. Preparation and characterizations of polymeric ionic liquid blending system based on hyperbranched poly（p⁃chloromethylstyrene） [J]. China Plastics, 2022, 36(3): 40-47.
[14]	LU Chunyan, WANG Gang, LIU Shuai, ZHU Tianrong, LIU Yun, WANG Haiping, HU Siqian. Preparation of high⁃transparency polyimide film by high⁃temperature polycondensation method [J]. China Plastics, 2022, 36(3): 48-52.
[15]	CAO Zhifeng, ZHAO Lipin, HE Ting, MA Baijun. Preparation and properties of five⁃layer co⁃extrusion barrier films [J]. China Plastics, 2022, 36(3): 64-68.