带点浇口转侧浇口浇注系统的注塑模设计

doi:10.19491/j.issn.1001-9278.2012.07.020

中国塑料 ›› 2012, Vol. 26 ›› Issue (07): 101-104 .DOI: 10.19491/j.issn.1001-9278.2012.07.020

• 机械与模具 • 上一篇

带点浇口转侧浇口浇注系统的注塑模设计

周铭杰蔡菊

广东轻工职业技术学院

收稿日期:2012-04-05 修回日期:1900-01-01 出版日期:2012-07-26 发布日期:2012-07-26

Design of Injection Mold with Feeding System Switching from Pin-point Gate to Side Gate

Received:2012-04-05 Revised:1900-01-01 Online:2012-07-26 Published:2012-07-26

摘要/Abstract

摘要： 通过分析香水瓶盖的结构特点和成型工艺，设计了香水瓶盖注塑模，介绍了模具结构与工作过程，重点阐述了点浇口转侧浇口浇注系统、脱模机构和斜顶侧抽芯机构的设计，最后介绍了点浇口转侧浇口浇注系统的应用实例。实践表明，点浇口转侧浇口浇注系统有利于浇口的设置和塑件的填充。

关键词: 香水瓶盖, 注塑模, 浇注系统, 脱模机构, 斜顶, 侧抽芯

Abstract: Based on the analysis of the structure characteristics and processing technology of the perfume bottle cap, an injection mould for this part was designed. The mould structure and its working process were introduced. The feeding system switching from pin-point gate to side gate，the demolding mechanism and the side core-pulling mechanism with lifter were illustrated in detail. The application instances of the feeding system switching from pin-point gate to side gate were introduced. It was proved that the feeding system switching from pin-point gate to side gate was adequate for setting of gate and filling of molded part.

Key words: perfume bottle cap, injection mould, feeding system, demolding mechanism, lifter, side core-pulling

周铭杰蔡菊. 带点浇口转侧浇口浇注系统的注塑模设计[J]. 中国塑料, 2012, 26(07): 101-104 .

. Design of Injection Mold with Feeding System Switching from Pin-point Gate to Side Gate[J]. China Plastics, 2012, 26(07): 101-104 .

[1]	胥永林, 张维合, 冯国树, 宋东阳, 杜海, 王靖, 魏海涛. 智能热水壶主体复杂抽芯及随形水路注塑模设计[J]. 中国塑料, 2022, 36(6): 137-141.
[2]	张维合, 冯国树, 朱晓敏, 吴梓纯, 叶明山, 杜海, 宋东阳, 王靖. 汽车右后门板顺序阀热流道大型薄壁注塑模具设计[J]. 中国塑料, 2022, 36(1): 166-171.
[3]	陈洪土, 张维合. 车载探测雷达固定架双色注塑模设计[J]. 中国塑料, 2021, 35(6): 106-110.
[4]	孙令真, 叶烁. 分体空调底盘注塑模具设计[J]. 中国塑料, 2021, 35(12): 129-136.
[5]	周建安. 行车记录仪面壳注塑模具设计[J]. 中国塑料, 2021, 35(11): 133-137.
[6]	张维合, 冯婧, 闫丽静, 刘方方, 邓成林. 汽车高位制动灯盖板大型注塑模具设计[J]. 中国塑料, 2021, 35(1): 98-102.
[7]	刘少华, 熊建武, 徐文庆, 胡智清, 陈黎明, 汪哲能. 车门拉钩底座盖热流道注塑模及模内热切机构结构设计[J]. 中国塑料, 2020, 34(9): 90-95.
[8]	丁立刚, 程国飞, 魏文强, 胡斯乔, 郭开翔. 带前模抽芯的S型阀室注射模具设计[J]. 中国塑料, 2020, 34(8): 95-100.
[9]	杨秋合, 杨安. 微型离心泵泵叶三层式滑块机构三板模具设计[J]. 中国塑料, 2020, 34(7): 97-103.
[10]	刘方方, 张维合. 汽车后视镜座大型精密注塑模设计[J]. 中国塑料, 2020, 34(6): 87-91.
[11]	刘庆东. 汽车塑料电镀装饰条注塑模具设计[J]. 中国塑料, 2020, 34(12): 88-91.
[12]	王静, 刘雪敏, 崔玉波. 含密集异型孔塑件的注塑模具设计[J]. 中国塑料, 2020, 34(11): 81-85.
[13]	彭国荣, 隋丽丽, 陆龙福. 基于脱模力数学模型的花洒变截面弯管抽芯机构设计[J]. 中国塑料, 2020, 34(10): 63-68.
[14]	徐慧. 端盖双滑块+斜顶3次复合抽芯机构注射模设计[J]. 中国塑料, 2020, 34(10): 80-85.
[15]	卞平肖国华. 基于CAE分析的转盘斜齿轮自润滑脱模机构模具结构设计[J]. 中国塑料, 2019, 33(2): 103-109.

带点浇口转侧浇口浇注系统的注塑模设计

Design of Injection Mold with Feeding System Switching from Pin-point Gate to Side Gate

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价