Automatic Determination of Melt Flow Rate for PS and ABS

doi:10.19491/j.issn.1001-9278.2011.11.019

China Plastics ›› 2011, Vol. 25 ›› Issue (11): 90-93 .DOI: 10.19491/j.issn.1001-9278.2011.11.019

Previous Articles Next Articles

Automatic Determination of Melt Flow Rate for PS and ABS

LIN Hong-Xiong Qinhong Bei Huihong Zhu Jinfeng Huang Bei yang Gufeng Chen

Received:2011-10-13 Revised:1900-01-01 Online:2011-11-26 Published:2011-11-26

Abstract

LIN Hong-Xiong Qinhong Bei Huihong Zhu Jinfeng Huang Bei yang Gufeng Chen. Automatic Determination of Melt Flow Rate for PS and ABS[J]. China Plastics, 2011, 25(11): 90-93 .

[1]	LI Juan, LI Ying, GUO Xiaolin, ZHANG Chen. Guidelines for the safety use of CO₂ foaming technology in the production of XPS foam industry in China [J]. China Plastics, 2022, 36(9): 160-166.
[2]	LIN Wen, ZHAO Jingjing, SU Tingting, WANG Zhanyong. Research progress in biodegradation of polystyrene [J]. China Plastics, 2022, 36(7): 143-149.
[3]	YANG Musen, QIAN Lijun, WANG Jingyu, ZHAO Zhen, WANG Guangyu, XIN Xiaohua. Synergistic effect of triphenyl phosphate and methyloctabromoether on flame retardancy of polystyrene [J]. China Plastics, 2022, 36(5): 36-42.
[4]	ZHAO Xinxin, JIN Xiaodong, SHI Yan, SUN Shibing, LYU Feng, TIAN Yingliang, ZHAO Zhiyong. Surface modification of extruded polystyrene based on ultraviolet⁃ozone irradiation [J]. China Plastics, 2022, 36(5): 8-13.
[5]	GUO Yiming, DONG Xiaochen, LIANG Shitong, WANG Sen, LIU Jichun. Effects of graphite type and size on flame retardancy of high⁃impact polystyrene and it’s action mechanism [J]. China Plastics, 2022, 36(3): 26-32.
[6]	JIN Fujing, HAO Yunan, JIAO Hongwen, ZHAO Hongyu. Application and Standard Interpretation of Graphite⁃modified Extruded Polystyrene Foam Boards for Thermal Insulation of Building [J]. China Plastics, 2021, 35(9): 109-115.
[7]	JIAN Ranran, YANG Weimin, MOHINI Sain. Study on Chemical Foaming Properties of Recycled⁃Carbon⁃Fiber⁃Reinforced Polystyrene Through Torsion Extrusion [J]. China Plastics, 2021, 35(8): 88-93.
[8]	ZHAO Yan, PAN Xiang, LIU Bengang. Properties and Applications of Expendable Polystyrene Geofoam [J]. China Plastics, 2021, 35(5): 97-106.
[9]	XIONG Huixia, ZHAO Wenjie. Properties and Microstructure of PS⁃g⁃PBA Emulsion⁃modified Cement Mortars [J]. China Plastics, 2021, 35(2): 29-33.
[10]	WANG Duyang, CAI Zhennan, HUANG Xingyuan, WANG Long, LI Mengshan. Diffusion Coefficient of Supercritical Carbon Dioxide in Polystyrene Melt [J]. China Plastics, 2021, 35(2): 63-70.
[11]	BAO Lulu, LIU Yi, HAN Liwang, YANG Tingjie, MENG Xin, GUO Xiaodong, WANG Yong, GOU Rongheng, LI Guofeng, ZHANG Minghui. Analysis of structure and performance of thin⁃walled injection⁃molded polypropylene with high melt flow rate [J]. China Plastics, 2021, 35(12): 27-31.
[12]	CHEN Kexin, CHEN Shuning, LIN Jianrong. One Pot Synthesis of Janus Nanosheet and Its Compatibilizating Effect on PS/TiO₂ Composites [J]. China Plastics, 2021, 35(10): 8-13.
[13]	Ya’e TANG, Bengang LIU. Study on Preparation and Foaming Properties of Polystyrene/Cross⁃linked PMA Blends [J]. China Plastics, 2020, 34(6): 45-51.
[14]	. Grafting Polymerization of Styrene on Surface of Modified Graphene Oxide [J]. China Plastics, 2017, 31(9): 81-85.
[15]	. Study on Flame Retardancy and Mechanical Properties of PS/MH/MRP Composites [J]. China Plastics, 2017, 31(7): 23-57 .

Automatic Determination of Melt Flow Rate for PS and ABS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments