1 |
TALBAMRUNG T, KASEMSOOK C, SANGTEAN W, et al. Effect of Peroxide and Organoclay on Thermal and Mechanical Properties of PLA in PLA/NBR Melted Blend [J]. Energy Procedia, 2016, 89: 274⁃281.
|
2 |
LI X, QI C, HAN L, et al. Influence of Dynamic Compressive Loading on the in Vitro, Degradation Behavior of Pure PLA and Mg/PLA Composite[J]. Acta Biomaterialia, 2017, 64: 269⁃278.
|
3 |
ZHAO H, CUI Z, WANG X, et al. Processing and Characterization of Solid and Microcellular Poly(lactic acid)/Polyhydroxybutyrate⁃valerate (PLA/PHBV) Blends and PLA/PHBV/Clay Nanocomposites[J]. Composites Part B:Engineering, 2013, 51(51): 79⁃91.
|
4 |
LORENZO M L D, OVYN R, MALINCONICO M, et al. Peculiar Crystallization Kinetics of Biodegradable Poly(lactic acid)/Poly(propylene carbonate) Blends[J]. Polymer Engineering & Science, 2016, 55(12): 2 698⁃2 705.
|
5 |
WANG G L, ZHANG D M, LI B, et al. Strong and Thermal⁃resistance Glass Fiber⁃reinforced Polylactic Acid (PLA) Composites Enabled by Heat Treatment[J]. International Journal of Biological Macromolecules, 2019, 129: 448⁃459.
|
6 |
LI MZ, HU X Y, HE M, YU J, LU S Jet al. Structure and Properties of Epoxy Modified PLA/Low Melting Point PA6 Composites[J]. Chinese Journal of Materials Research, 2019, 33(4):261⁃270.
|
7 |
CHEN W, CHEN H, YUAN Y, et al. Synergistic Effects of Polyethylene Glycol and Organic Montmorillonite on The Plasticization and Enhancement of Poly(lactic acid)[J]. Journal of Applied Polymer Science, 2019,136(21): 47576.
|
8 |
GARCIA⁃CAMPO M J, QUILES⁃CARRILLO L, SANCHEZ⁃NACHER L, et al. High Toughness Poly(lactic acid) (PLA) Formulations Obtained by Ternary Blends with Poly(3⁃hydroxybutyrate) (PHB) and Flexible Polyesters From Succinic Acid[J]. Polymer Bulletin, 2019, 76(4): 1 839⁃1 859.
|
9 |
HOU A L, QU J P. Super⁃Toughened Poly(lactic Acid) with Poly(epsilon⁃caprolactone) and Ethylene⁃Methyl Acrylate⁃Glycidyl Methacrylate by Reactive Melt Blending[J]. Polymers, 2019,11(5): 771.
|
10 |
WANG Y, MEI Y, WANG Q, et al. Improved Fracture Toughness and Ductility of PLA Composites by Incorporating a Small Amount of Surface⁃modified Helical Carbon Nanotubes[J]. Composites Part B:Engineering, 2019, 162:54⁃61.
|
11 |
KILIC N T, CAN B N, KODAL M, et al. Compatibilization of PLA/PBAT Blends by Using Epoxy‐POSS[J]. Journal of Applied Polymer Science, 2019, 136(12): 47217.
|
12 |
CARBONELL⁃VERDU A, FERRI JM, DOMINICI F, et al. Manufacturing and Compatibilization of PLA/PBAT Binary Blends by Cottonseed Oil⁃based Derivatives[J]. Express Polymer Letters, 2018, 12(9):808⁃823.
|
13 |
PHETPHAISIT C W, WAPANYAKUL W, PHINYOCHEEP P. Effect of Modified Rubber Powder on the Morphology and Thermal and Mechanical Properties of Blown Poly(lactic acid)⁃hydroxyl Epoxidized Natural Rubber Films for Flexible Film Packaging[J]. Journal of Applied Polymer Science, 2019, 136(21): 47503.
|
14 |
AHMED M F, LI Y, YAO Z, et al. TPU/PLA Blend Foams: Enhanced Foamability, Structural Stability, and Implications for Shape Memory Foams[J]. Journal of Applied Polymer Science, 2019, 136(17): 47416.
|
15 |
AGUERO A, QUILES⁃CARRILLO L, JORDA⁃VILAPLANA A, et al. Effect of Different Compatibilizers on Environmentally Friendly Composites From Poly(lactic acid) and Diatomaceous Earth[J]. Polymer International, 2019, 68(5):893⁃903.
|
16 |
YANG Z Z, BI H J, BI Y B, et al. Comparison Between Polyethylene Glycol and Tributyl Citrate to Modify the Properties of Wood Fiber/Polylactic Acid Biocomposites[J]. Polymer Composites, 2019, 40(4):1 384⁃1 394.
|
17 |
WENG F Q, WANG M, KORANTENG E, et al. Effects of PBA⁃Based Polyurethane Prepolymer as Compatibilizer on the Properties of Polylactic Acid⁃Starch Composites[J]. Starch⁃Starke, 2019, 71(3⁃4):1800205.
|
18 |
SHOJAEIARANI J, BAJWA D S, HARTMAN K. Esterified Cellulose Nanocrystals as Reinforcement in Poly(lactic acid) Nanocomposites[J]. Cellulose, 2019, 26(4):2 349⁃2 362.
|
19 |
INHMHANEEF, BUYS Y F, SHAFFIAR N M, et al. Miscibility, Mechanical and Thermal Properties of Polylactic Acid/Polypropylene Carbonate (PLA/PPC) Blends Prepared by Melt⁃mixing Method[J]. Materials Today⁃Proceedings, 2019, 17(3):534⁃542.
|
20 |
ZHOU Y, WANG J, CAI S Y, et al. Effect of POE⁃g⁃GMA on Mechanical, Rheological and Thermal Properties of Poly(lactic acid)/Poly(propylene carbonate) Blends[J]. Polymer Bulletin, 2018, 75(12): 5 437⁃5 454.
|
21 |
GAO J, BAI H, ZHANG Q, et al. Effect of Homopolymer Poly(vinyl acetate) on Compatibility and Mechanical Properties of Poly(propylene carbonate)/Poly(lactic acid) Blends. Express Polym Lett, 2012(6): 860⁃870.
|
22 |
DENG Y, SAUCIERSAWYER J, HOIMES C, et al. The Effect of Hyperbranched Polyglycerol Coatings on Drug Delivery Using Degradable Polymer Nanoparticles[J]. Biomaterials, 2014, 35(24):6 595⁃6 602.
|
23 |
TOMUTA A, FERRANDO F, ÀSERRA, et al. New Aromatic⁃Aliphatic Hyperbranched Polyesters with Vinylic End Groups of Different Length as Modifiers of Epoxy/Anhydride Thermosets[J]. Reactive & Functional Polymers, 2012, 72(9):556⁃563.
|
24 |
RUN M T, WANG J, YAO M, et al. Influences of Hyperbranched Poly(amide⁃ester) on The Properties of Poly(butylene succinate)[J]. Materials Chemistry & Physics, 2013, 139(2/3):988⁃997.
|
25 |
TANG B, LIU X B, ZHAO X L, et al. Highly Efficient in Situ Toughening of Epoxy Thermosets with Reactive Hyperbranched Polyurethane[J]. Journal of Applied Polymer Science, 2014, 131(16):1 107⁃1 117.
|
26 |
CHEN S F, ZHANG D H, JIANG S B, et al. Preparation of Hyperbranched Epoxy Resin Containing Nitrogen Heterocycle and Its Toughened and Reinforced Compo⁃sites[J]. Journal of Applied Polymer Science, 2012, 123(6):3 261⁃3 269.
|
27 |
LUO L J, MENG Y, QIU T, et al. An Epoxy—Ended Hyperbranched Polymer as a New Modifier for Toughe⁃ning and Reinforcing in Epoxy Resin[J]. Journal of Applied Polymer Science, 2013, 130(2):1 064⁃1 073.
|
28 |
JIANG S Z, YAO Y F, CHEN Q, et al. NMR Study of Thermoresponsive Hyperbranched Polymer in Aqueous Solution with Implication on the Phase Transition[J]. Macromolecules, 2013, 46(24):9 688⁃9 697.
|
29 |
FOTIADOU S, KARAGEORGAKI C, CHRISSOPOULOU K, et al. Structure and Dynamics of Hyperbranched Polymer/Layered Silicate Nanocomposites[J]. Macromolecules, 2013, 46(7):2 842⁃2 855.
|
30 |
BHARDWAJ R, MOHANTY AK. Modification of Brittle Polylactide by Novel Hyperbranched Polymer⁃based Nanostructures.[J]. Biomacromolecules, 2007, 8(8):2 476⁃2 484.
|
31 |
HUBER T, POTSCHKE P, POMPE G, et al. Blends of Hyperbranched Poly(ether amide)s and Polyamide⁃6[J]. Macromolecular Materials and Engineering, 2000, 280(281): 33⁃40.
|
32 |
JIN Y J, MEN S, WENG Y X. An Investigation of the Impact of an Amino⁃Ended Hyperbranched Polymer as a New Type of Modifier on the Compatibility of PLA/PBAT Blends[J]. Journal of Polymer Engineering, 2018, 38 (3): 223⁃229.
|
33 |
JIN Y J, WANG E E, WENG Y X, et al. The Investigation of the Toughening Mechanism of PHBV/PBAT with a Novel Hyperbranched Ethylenediamine Triazine Polymer Based Modifier: The Formation of the Transition Layer and the Microcrosslinking Structure[J].Journal of Polymers and the Environment, 2018, 26: 4 158⁃4 167.
|
34 |
JIN Y J, GAO P X, QIAN L Jet al. Synthesis of Hyperbranched Aromatic Amine Triazine Polymer and Its Flame Retardation Performance on Polypropylen[J]. China Plastics, 2013, 27(5): 77⁃81.
|
35 |
XU M L, CHEN Y J, QIAN L J, et al. Component Ratio Effects of Hyperbranched Triazine Compound and Ammonium Polyphosphate in Flame⁃Retardant Polypropylene Composites[J]. Journal of Applied Polymer Science, 2014, 131(21): 41 006.
|