矿泉水瓶盖的热流道注塑模设计

doi:10.19491/j.issn.1001-9278.2009.12.020

中国塑料 ›› 2009, Vol. 23 ›› Issue (12): 92-96 .DOI: 10.19491/j.issn.1001-9278.2009.12.020

• 机械与模具 • 上一篇

矿泉水瓶盖的热流道注塑模设计

匡唐清李树桢廖直梁

华东交通大学华东交通大学富士康科技集团

收稿日期:2009-07-14 修回日期:1900-01-01 出版日期:2009-12-26 发布日期:2009-12-26

Development of Hot Runner Injection Mold for Mineral-Water Bottle Lids

Shu-Zhen Li Zhi-Liang Liao

Received:2009-07-14 Revised:1900-01-01 Online:2009-12-26 Published:2009-12-26

摘要/Abstract

摘要： A hot runner injection mould for bottle lids was designed based on CAD/CAE. The top-center of the lid was selected as the gate location. A set of optimal parameters was determined via molding window analysis, i.e., mold temperature 60 ℃, melt temperature 220 ℃, and injection time 0.4 s. The key issues in the design of the hot runner system, the structure and movement principle of sequential demoulding mechanism were introduced in details. The effects of injection pressure and clamp force on the filling quality were examined to improve the design.

关键词: 矿泉水瓶盖, 注塑模, CAE, 热流道, 顺序脱模

Abstract: Development of hot runner injection mold for mineral -water bottle lids was carried out based on CAD/CAE technology in this paper. Moldflow was adopted to analysis the best gate location, molding windows, flow, and the results can be used as reference for the mold design and process parameters setting. The key issues of the design of the hot runner system and the structure and movement principle of t sequential demoulding mechanism were illuminated in details. Practice has proved that the movement of the mold is reliable, productive efficiency is high and the quality of products is stable.

Key words: Mineral -Water Bottle Lids, Injection Mold, CAE, hot runner, sequential demoulding mechanism

匡唐清李树桢廖直梁. 矿泉水瓶盖的热流道注塑模设计[J]. 中国塑料, 2009, 23(12): 92-96 .

Shu-Zhen Li Zhi-Liang Liao. Development of Hot Runner Injection Mold for Mineral-Water Bottle Lids[J]. China Plastics, 2009, 23(12): 92-96 .

[1]	胥永林, 张维合, 冯国树, 宋东阳, 杜海, 王靖, 魏海涛. 智能热水壶主体复杂抽芯及随形水路注塑模设计[J]. 中国塑料, 2022, 36(6): 137-141.
[2]	张维合, 冯国树, 朱晓敏, 吴梓纯, 叶明山, 杜海, 宋东阳, 王靖. 汽车右后门板顺序阀热流道大型薄壁注塑模具设计[J]. 中国塑料, 2022, 36(1): 166-171.
[3]	陈洪土, 张维合. 车载探测雷达固定架双色注塑模设计[J]. 中国塑料, 2021, 35(6): 106-110.
[4]	吴俊超. 基于Moldflow的汽车仪表板大型塑件注塑模工艺优化[J]. 中国塑料, 2021, 35(12): 121-128.
[5]	孙令真, 叶烁. 分体空调底盘注塑模具设计[J]. 中国塑料, 2021, 35(12): 129-136.
[6]	刘红燕. 助力筒带2种多次抽芯机构热流道注射模设计[J]. 中国塑料, 2021, 35(1): 103-109.
[7]	张维合, 冯婧, 闫丽静, 刘方方, 邓成林. 汽车高位制动灯盖板大型注塑模具设计[J]. 中国塑料, 2021, 35(1): 98-102.
[8]	徐新华. 操控旋钮双色注射成型热流道模具设计[J]. 中国塑料, 2020, 34(9): 84-89.
[9]	刘少华, 熊建武, 徐文庆, 胡智清, 陈黎明, 汪哲能. 车门拉钩底座盖热流道注塑模及模内热切机构结构设计[J]. 中国塑料, 2020, 34(9): 90-95.
[10]	丁立刚, 程国飞, 魏文强, 胡斯乔, 郭开翔. 带前模抽芯的S型阀室注射模具设计[J]. 中国塑料, 2020, 34(8): 95-100.
[11]	杨秋合, 杨安. 微型离心泵泵叶三层式滑块机构三板模具设计[J]. 中国塑料, 2020, 34(7): 97-103.
[12]	刘方方, 张维合. 汽车后视镜座大型精密注塑模设计[J]. 中国塑料, 2020, 34(6): 87-91.
[13]	郑子军, 肖国华, 沈忠良, 杨少增. 游戏机手柄热流道立式注塑4层叠层注塑模设计[J]. 中国塑料, 2020, 34(4): 96-101.
[14]	刘庆东. 汽车塑料电镀装饰条注塑模具设计[J]. 中国塑料, 2020, 34(12): 88-91.
[15]	王静, 刘雪敏, 崔玉波. 含密集异型孔塑件的注塑模具设计[J]. 中国塑料, 2020, 34(11): 81-85.

矿泉水瓶盖的热流道注塑模设计

Development of Hot Runner Injection Mold for Mineral-Water Bottle Lids

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价